VCP10-29 Equivalent & Substitute Parts

Part Overview

The VCP10-29 is a BNC connector plug with male pin configuration manufactured by Cinch Connectivity Solutions. This component operates at 75 Ohms impedance with free hanging (in-line) crimp termination and bayonet lock fastening. The part is currently active in production with 707 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required for system compatibility, inventory availability, or supply chain optimization.

Substiute Parts

VCP10-29

Cinch Connectivity SolutionsIn Stock: 789VCP10-29 Datasheet

Current PartRFQ

11_BNC-75-3-9/133_NE

Huber+Suhner, Inc.In Stock: 99011_BNC-75-3-9/133_NE Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 11_BNC-75-3-9/133_NE manufactured by Huber+Suhner, Inc. qualifies as a parametric equivalent based on the following matching criteria:

• Connector style: BNC
• Connector type: Plug, Male Pin
• Impedance: 75 Ohms
• Contact termination: Crimp
• Shield termination: Crimp
• Mounting type: Free Hanging (In-Line)
• Fastening type: Bayonet Lock
• Frequency maximum: 1 GHz
• Operating temperature range: -65°C ~ 165°C
• Mating cycles: 500
• Center contact material: Brass
• Body material: Brass
• Center contact plating: Gold

These parameters define the functional and mechanical compatibility envelope for direct substitution in applications requiring 75 Ohm BNC male crimp connectors with bayonet locking.

Parameter Comparison

Engineering Selection Recommendations

Both the VCP10-29 and 11_BNC-75-3-9/133_NE are active production components with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: VCP10-29 has 707 units in stock; 11_BNC-75-3-9/133_NE has 955 units in stock
• Compliance requirements: Both parts carry EAR99 ECCN classification and identical HTSUS codes (8536.69.4010)
• Regulatory status: The Huber+Suhner part carries ROHS3 compliance and REACH Unaffected status

The VCP10-29 includes 3 pieces per connector (1 connector, 1 contact, 1 ferrule), while the Huber+Suhner part does not specify included components. Verify packaging contents against procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can the 11_BNC-75-3-9/133_NE directly replace the VCP10-29 in existing designs?

A: Yes. Both connectors share identical electrical parameters (75 Ohm impedance, 1 GHz maximum frequency), mechanical configuration (BNC plug, male pin, bayonet lock, free hanging crimp), and operating specifications (-65°C to 165°C, 500 mating cycles). Direct substitution is supported for applications within these specifications.

Q: What are the differences between these two parts?

A: The primary differences are manufacturer identity and body finish. The VCP10-29 uses nickel body finish, while the 11_BNC-75-3-9/133_NE uses white bronze finish. The Huber+Suhner part specifies dielectric material as PFA/PTFE versus PTFE alone for the Cinch part. The Huber+Suhner part includes ROHS3 compliance and REACH Unaffected status.

Q: Are there packaging differences?

A: The VCP10-29 includes 3 pieces per connector (connector, contact, ferrule). The 11_BNC-75-3-9/133_NE packaging details are not specified in the data provided. Confirm packaging contents with the supplier before procurement.

Q: Which part should be selected for new designs?

A: Selection depends on supply chain requirements and compliance mandates. Both parts meet identical functional specifications. If ROHS3 compliance is required, the 11_BNC-75-3-9/133_NE is the appropriate choice. If specific packaging inclusions are required, verify component contents with each manufacturer.

Q: What is the maximum operating frequency for these connectors?

A: Both connectors are rated to 1 GHz maximum frequency. Applications requiring higher frequency operation require alternative connector types.