Equivalent & Substitute Parts Reference for VCP05US12

Part Overview

The XP Power VCP05US12 is an open frame AC/DC converter designed for ITE (commercial) applications, providing a single output of 12V at 400mA with a power rating of 5W. This model features universal input specifications (90 ~ 264 VAC), through-hole mounting, and compliance with ROHS3 and IEC/EN 62368-1 standards. The VCP05US12 is currently designated as obsolete, necessitating the identification of alternative models to maintain compatibility and design continuity in existing applications.

Substiute Parts

VCP05US12

XP PowerIn Stock: 1034VCP05US12 Datasheet

Current PartRFQ

VCE05US12-P

XP PowerIn Stock: 1058VCE05US12-P Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the open frame AC/DC converter category requires strict adherence to parameters that impact electrical and mechanical compatibility. Only parts matching or exceeding the following criteria are considered valid substitutes: output voltage (12V), output power (5W), maximum output current, universal input voltage range, number of outputs, mounting type, RoHS3 compliance, and ITE (Commercial) application suitability. Approval agencies and package details are directly compared due to regulatory and assembly constraints.

Parameter Comparison

Engineering Selection Recommendations

The VCP05US12 is classified as obsolete; the substitute part VCE05US12-P remains active, supports ROHS3 compliance, and features universal input and ITE (Commercial) application suitability. Approvals should be reviewed for certification compatibility based strictly on provided agency data. Mechanical differences in package and approval agency are noted.

Frequently Asked Questions (FAQ)

Q1: What core parameters must match to substitute an open frame AC/DC converter? A: Output voltage, power rating, maximum output current, input voltage range, number of outputs, mounting type, RoHS compliance, application, operating temperature, and package/case.

Q2: Are the input and output voltages identical between VCP05US12 and VCE05US12-P? A: Both models offer a 12V output and universal input within a specified VAC range.

Q3: Does the substitute VCE05US12-P support the same mounting and application requirements? A: Yes, both are through-hole mounted and specified for ITE (Commercial) use.

Q4: What mechanical differences exist between these models? A: Main differences include package type (5-DIP vs. 4-DIP Module) and physical dimensions.

Q5: Are certification approvals equivalent for regulatory purposes? A: Review required; the main part features cUL, IEC, and EN approvals, while the substitute part features CB approval.

Q6: Is the substitute RoHS3 compliant? A: Yes, both the main and substitute parts are listed as ROHS3 compliant.

Q7: Does the substitute offer a higher output current? A: The substitute VCE05US12-P delivers up to 410mA, which is greater than the main part’s 400mA.