VCAS060305A150RP Equivalent & Substitute Parts

Part Overview

The VCAS060305A150RP is a Transient Voltage Suppressor (TVS) varistor manufactured by KYOCERA AVX, classified as a FLEXITERM® series component. This surface mount device operates at 8.5 V typical varistor voltage with a 30 A surge current rating in a compact 0603 (1608 Metric) package. The part is actively produced and maintains automotive-grade qualification under AEC-Q200 standards. Substitute parts are identified to address packaging format variations, inventory availability, and equivalent electrical performance across different distribution channels and reel configurations.

Substiute Parts

VCAS060305A150RP

KYOCERA AVXIn Stock: 1151VCAS060305A150RP Datasheet

Current PartRFQ

VC060305A150DP

KYOCERA AVXIn Stock: 26178VC060305A150DP Datasheet

Parametric EquivalentRFQ

VC060305A150RP

KYOCERA AVXIn Stock: 4928VC060305A150RP Datasheet

Parametric EquivalentRFQ

VCAS060305A150DP

KYOCERA AVXIn Stock: 15464VCAS060305A150DP Datasheet

Parametric EquivalentRFQ

VCAS060305A150DZ

KYOCERA AVXIn Stock: 4982VCAS060305A150DZ Datasheet

Parametric EquivalentRFQ

VCAS060305A150RZ

KYOCERA AVXIn Stock: 6496VCAS060305A150RZ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the VCAS060305A150RP is determined by electrical parameter equivalence and mechanical compatibility. All identified substitute parts maintain identical electrical specifications: 8.5 V typical varistor voltage (6.8 to 10.2 V range), 30 A surge current, 5.6 V maximum DC rating, 4 V maximum AC rating, 0.1 J energy rating, and 750 pF capacitance at 1 kHz. All substitutes operate across the same temperature range (-55°C to 125°C) and use the identical 0603 (1608 Metric) surface mount package with MLCV mounting configuration.

Substitution logic is based on the following key parameters:

• Varistor voltage specification (6.8 to 10.2 V range)
• Surge current rating (30 A)
• Package form factor (0603 / 1608 Metric)
• Surface mount MLCV mounting type
• Single circuit configuration
• Operating temperature range (-55°C to 125°C)
• RoHS3 compliance and MSL 1 rating

Differences among substitutes are limited to packaging format (Tape & Reel versus Cut Tape with Digi-Reel®) and series designation (FLEXITERM® versus TransGuard®), which do not affect electrical performance or mechanical fit.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical equivalence to the VCAS060305A150RP. Selection among substitutes should be based on the following criteria:

Packaging Format Requirements: The VCAS060305A150RP is supplied in Tape & Reel (TR) format. Substitutes VC060305A150DP and VC060305A150RP are available in Cut Tape (CT) with Digi-Reel® packaging, suitable for applications requiring smaller quantity handling or alternative reel configurations. Substitutes VCAS060305A150DP, VCAS060305A150DZ, and VCAS060305A150RZ maintain Tape & Reel (TR) packaging identical to the primary part.

Compliance and Certification: All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. The VCAS060305A150RP and VCAS060305A150DZ carry explicit AEC-Q200 automotive qualification. All parts are active products with confirmed inventory availability.

Inventory Availability: VC060305A150DP offers the highest inventory level (26,100 pcs), followed by VCAS060305A150DP (15,400 pcs). Selection based on packaging preference and supply chain requirements does not compromise electrical performance or reliability.

Series Designation: FLEXITERM® series parts (VCAS060305A150RP, VCAS060305A150DZ) and TransGuard® series parts (VC060305A150DP, VC060305A150RP, VCAS060305A150DP, VCAS060305A150RZ) are electrically equivalent. Series designation reflects product line organization and does not affect functional substitution.

Frequently Asked Questions (FAQ)

Q: Can VC060305A150DP be used as a direct replacement for VCAS060305A150RP?

A: Yes. Both parts share identical electrical specifications (8.5 V typical varistor voltage, 30 A surge current, 5.6 V maximum DC, 4 V maximum AC, 0.1 J energy, 750 pF capacitance). The primary difference is packaging format: VC060305A150DP uses Cut Tape with Digi-Reel® while VCAS060305A150RP uses Tape & Reel. Both use the same 0603 (1608 Metric) surface mount package and MLCV mounting configuration. Mechanical fit and electrical performance are identical.

Q: What is the difference between FLEXITERM® and TransGuard® series?

A: FLEXITERM® and TransGuard® are series designations within KYOCERA AVX's varistor product line. All parts in this substitution group maintain identical electrical parameters and operating characteristics. Series designation reflects product line organization and manufacturing lineage but does not affect electrical performance, reliability, or substitution compatibility.

Q: Are all substitute parts AEC-Q200 qualified?

A: The VCAS060305A150RP and VCAS060305A150DZ carry explicit AEC-Q200 automotive qualification. All substitute parts are manufactured by KYOCERA AVX with ROHS3 compliance and MSL 1 rating. Specific AEC-Q200 qualification status for individual substitute part numbers should be confirmed through the manufacturer's current documentation if automotive qualification is a design requirement.

Q: Can I use Cut Tape (CT) & Digi-Reel® packaged parts in automated assembly?

A: Cut Tape with Digi-Reel® packaging (VC060305A150DP, VC060305A150RP) is designed for automated pick-and-place assembly equipment. Compatibility depends on your specific assembly equipment configuration. Tape & Reel (TR) packaging (VCAS060305A150RP, VCAS060305A150DP, VCAS060305A150DZ, VCAS060305A150RZ) is standard for high-volume automated assembly. Verify your equipment specifications before selecting packaging format.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the identical temperature range of -55°C to 125°C (TA). This specification is consistent across all listed equivalents and does not vary by packaging format or series designation.

Q: Are there any differences in RoHS or REACH compliance among the substitutes?

A: All substitute parts are ROHS3 compliant and REACH unaffected. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for all parts. ECCN classification is EAR99 and HTSUS code is 8533.40.4000 across all substitutes. Compliance status is uniform across the entire substitution group.

Q: Which substitute part has the highest inventory availability?

A: VC060305A150DP offers the highest inventory level at 26,100 pcs. This part uses Cut Tape with Digi-Reel® packaging. If Tape & Reel packaging is required, VCAS060305A150DP provides the highest availability at 15,400 pcs.