VC120605D150TP Equivalent & Substitute Parts

Part Overview

The VC120605D150TP is an 8.5 V 150 A Transient Voltage Suppressor (TVS) varistor manufactured by KYOCERA AVX in the TransGuard® series. This surface mount component operates in the MLCV 1206 (3216 Metric) package format and is designed for transient voltage protection in electronic circuits. The part maintains Active product status and is ROHS3 compliant. Substitute parts are identified when electrical parameters, mechanical specifications, and compliance certifications remain identical across different packaging configurations or internal manufacturing variants.

Substiute Parts

VC120605D150TP

KYOCERA AVXIn Stock: 869VC120605D150TP Datasheet

Current PartRFQ

VC120605D150DP

KYOCERA AVXIn Stock: 1989VC120605D150DP Datasheet

Parametric EquivalentRFQ

VC120605D150RP

KYOCERA AVXIn Stock: 5660VC120605D150RP Datasheet

Parametric EquivalentRFQ

VCAS120605D150DP

KYOCERA AVXIn Stock: 51010VCAS120605D150DP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the VC120605D150TP are identified based on electrical and mechanical parameter equivalence. All substitute parts maintain identical electrical specifications: 8.5 V typical varistor voltage, 150 A surge current, 4 V maximum AC rating, 5.6 V maximum DC rating, 0.4 J energy rating, and 3000 pF capacitance at 1 kHz. All parts operate across the same temperature range (-55°C to 125°C) and use the identical 1206 (3216 Metric) surface mount package.

The substitution logic is based on the following key parameters:

• Varistor voltage specifications (Min/Typ/Max)
• Surge current rating
• Maximum voltage ratings (AC and DC)
• Energy dissipation capacity
• Package dimensions and mounting type
• Operating temperature range
• Compliance certifications (ROHS3, REACH Unaffected)

Differences between the main part and substitutes are limited to packaging format and internal manufacturing variants, which do not affect electrical performance or circuit compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts (VC120605D150DP, VC120605D150RP, VCAS120605D150DP) are electrically and mechanically equivalent to the VC120605D150TP. Selection between these parts is determined by packaging and supply chain requirements rather than electrical performance.

VC120605D150TP (Tape & Reel): Primary specification format. Suitable for high-volume automated assembly operations requiring continuous reel feeding.

VC120605D150DP (Cut Tape & Digi-Reel®): Alternative packaging format offering flexibility for mixed-volume production runs. Digi-Reel® packaging provides intermediate quantity options between cut tape and full reel quantities.

VC120605D150RP (Cut Tape & Digi-Reel®): Equivalent to VC120605D150DP with identical electrical specifications and alternative packaging configuration. Highest inventory availability (5574 pcs) among substitute options.

VCAS120605D150DP (Tape & Reel): Variant designation with Tape & Reel packaging. Largest available inventory (50943 pcs). Functionally identical to VC120605D150TP with equivalent electrical performance.

All parts maintain Active product status, ROHS3 compliance, and REACH Unaffected designation. Selection should be based on packaging compatibility with assembly equipment and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can VC120605D150DP be used as a direct replacement for VC120605D150TP?

A: Yes. Both parts are electrically identical with matching varistor voltage (8.5 V typical), surge current (150 A), voltage ratings, energy dissipation, and operating temperature range. The difference is packaging format: VC120605D150TP uses Tape & Reel (TR) while VC120605D150DP uses Cut Tape (CT) & Digi-Reel®. Circuit performance is identical.

Q: What is the difference between VC120605D150RP and VC120605D150DP?

A: Both parts share identical electrical specifications and Cut Tape & Digi-Reel® packaging. The difference is an internal manufacturing variant designation. Electrical performance and mechanical compatibility are equivalent.

Q: Is VCAS120605D150DP compatible with VC120605D150TP in circuit applications?

A: Yes. VCAS120605D150DP maintains all electrical parameters identical to VC120605D150TP: 8.5 V varistor voltage, 150 A surge current, 4 V maximum AC, 5.6 V maximum DC, 0.4 J energy, and 3000 pF capacitance. Both use Tape & Reel packaging and 1206 (3216 Metric) surface mount format.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel (TR), Cut Tape (CT), and Digi-Reel® are packaging and delivery formats only. They do not affect component electrical characteristics, voltage ratings, surge current capacity, or circuit behavior.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. VC120605D150TP, VC120605D150DP, VC120605D150RP, and VCAS120605D150DP are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.

Q: Which substitute part has the highest inventory availability?

A: VCAS120605D150DP has the highest inventory with 50943 pcs in stock. VC120605D150RP has 5574 pcs, VC120605D150DP has 1893 pcs, and VC120605D150TP has 826 pcs.

Q: Can these parts be used interchangeably in automated assembly?

A: Interchangeability depends on assembly equipment compatibility. Tape & Reel (TR) format parts (VC120605D150TP, VCAS120605D150DP) are compatible with standard reel-fed pick-and-place systems. Cut Tape (CT) & Digi-Reel® format parts (VC120605D150DP, VC120605D150RP) require compatible tape-feeding equipment. Verify equipment specifications before substitution.