BNC Connector Plug VB10-2062 Equivalent & Substitute Parts

Part Overview

The VB10-2062 is a BNC connector plug manufactured by Cinch Connectivity Solutions, designed for 75-ohm coaxial cable applications. This male pin connector features crimp termination for both center contact and shield, with free-hanging (in-line) mounting configuration. The part is currently active in production with 1161 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part may be unavailable or require alternative sourcing.

Key Parameters

Parameter	Value
Connector Style	BNC
Connector Type	Plug, Male Pin
Impedance	75 Ohms
Contact Termination	Crimp
Shield Termination	Crimp
Mounting Type	Free Hanging (In-Line)
Cable Group	RG-179, RG-187
Fastening Type	Bayonet Lock
Frequency - Max	1 GHz
Voltage Rating	500 V
Operating Temperature	-65°C ~ 165°C
Insertion Loss	0.1 dB

Substitute Part Grouping Explanation

Substitute parts for the VB10-2062 are identified based on strict equivalence across the following critical parameters:

Connector Style & Type: BNC plug, male pin configuration
Impedance: 75 ohms (mandatory for RF signal integrity)
Termination Method: Crimp contact and shield termination
Mounting Configuration: Free-hanging (in-line) orientation
Cable Compatibility: RG-179 and RG-187 cable groups
Fastening Mechanism: Bayonet lock interface
Frequency Rating: 1 GHz maximum operating frequency
Voltage Rating: 500 V minimum
Environmental Range: Operating temperature -65°C to 165°C

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Variations in non-critical parameters such as body material, packaging format, or inventory levels do not affect functional interchangeability.

Parameter Comparison

Parameter	VB10-2062 (Cinch)	VB10-2061 (Cinch)	RF1-03-D-03-75 (Adam Tech)
Connector Style	BNC	BNC	BNC
Connector Type	Plug, Male Pin	Plug, Male Pin	Plug, Male Pin
Impedance	75 Ohms	75 Ohms	75 Ohms
Contact Termination	Crimp	Crimp	Crimp
Shield Termination	Crimp	Crimp	Crimp
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)
Cable Group	RG-179, RG-187	RG-179, RG-187	RG-179, RG-187
Fastening Type	Bayonet Lock	Bayonet Lock	Bayonet Lock
Frequency - Max	1 GHz	1 GHz	1 GHz
Voltage Rating	500 V	500 V	500 V
Operating Temperature	-65°C ~ 165°C	-65°C ~ 165°C	Not specified
Insertion Loss	0.1 dB	0.1 dB	Not specified
Center Contact Material	Brass	Brass	Brass
Body Material	Brass	Brass	Zinc
Body Finish	Nickel	Nickel	Nickel
Center Contact Plating	Gold	Gold	Gold
RoHS Status	RoHS Compliant	RoHS Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
ECCN	EAR99	EAR99	EAR99
HTSUS Code	8536.69.4010	8536.69.4010	8536.69.4010

Engineering Selection Recommendations

Both substitute parts meet the functional and compliance requirements for direct replacement of the VB10-2062:

VB10-2061 (Cinch Connectivity Solutions): This part is manufactured by the same supplier as the primary component and maintains identical electrical specifications, material composition, and performance characteristics. It carries RoHS compliance certification and is currently in active production status with 1266 units available. Selection of this substitute provides supply continuity from a single manufacturer.

RF1-03-D-03-75 (Adam Tech): This part meets all critical electrical and mechanical parameters required for BNC 75-ohm plug applications. It carries ROHS3 compliance certification and REACH unaffected status. The part is supplied in bag packaging format rather than bulk, and certain performance metrics (operating temperature range and insertion loss) are not specified in available documentation. This substitute is suitable for applications where the unspecified parameters fall within acceptable operational limits.

Both substitutes are classified as active products with current inventory availability and maintain compliance with applicable regulatory standards.

Frequently Asked Questions (FAQ)

Q: Can RF1-03-D-03-75 be used as a direct replacement for VB10-2062?

A: Yes. Both parts share identical BNC connector style, 75-ohm impedance, crimp termination, free-hanging mounting, and bayonet lock fastening. All critical electrical and mechanical parameters align. The RF1-03-D-03-75 is a parametric equivalent suitable for direct substitution in applications where the unspecified operating temperature and insertion loss parameters are acceptable.

Q: What is the difference between VB10-2062 and VB10-2061?

A: These parts are functionally identical. Both are manufactured by Cinch Connectivity Solutions with matching electrical specifications, materials, finishes, and performance ratings. The primary difference is inventory availability and part number designation within the VB10 series.

Q: Are there packaging differences between these substitutes?

A: Yes. VB10-2062 and VB10-2061 are supplied in bulk packaging. RF1-03-D-03-75 is supplied in bag packaging. Packaging format does not affect connector performance or compatibility.

Q: Do all three parts support RG-179 and RG-187 cables?

A: Yes. All three parts are specified for RG-179 and RG-187 cable groups, ensuring mechanical and electrical compatibility across the substitute group.

Q: What compliance certifications apply to these parts?

A: VB10-2062 and VB10-2061 carry RoHS compliance certification. RF1-03-D-03-75 carries ROHS3 compliance certification and is REACH unaffected. All three parts are classified under ECCN EAR99 and HTSUS code 8536.69.4010.

Q: Is the 0.1 dB insertion loss specification critical for substitution?

A: The 0.1 dB insertion loss is specified for VB10-2062 and VB10-2061. This parameter is not provided for RF1-03-D-03-75. Substitution suitability depends on application requirements. If insertion loss specification is mandatory, VB10-2061 is the preferred substitute.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message