Equivalent & Substitute Parts for Honeywell V7-2B17D8-213 SPDT Snap Action Switch

Part Overview

The Honeywell V7-2B17D8-213 is a snap action SPDT (Single Pole Double Throw) switch rated for 11A at 125V AC and 500mA at 125V DC. This component features chassis mount configuration with quick connect 0.187" (4.7mm) termination and operates across -40°C to 85°C. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations.

Substiute Parts

V7-2B17D8-213

Honeywell Sensing and Productivity SolutionsIn Stock: 886V7-2B17D8-213 Datasheet

Current PartRFQ

LS0851505F100C1A

E-SwitchIn Stock: 1037LS0851505F100C1A Datasheet

SimilarRFQ

LS0851505F160C1A

E-SwitchIn Stock: 1116LS0851505F160C1A Datasheet

SimilarRFQ

LS0851505F250C1A

E-SwitchIn Stock: 9571LS0851505F250C1A Datasheet

SimilarRFQ

LS0851505F250C2A

E-SwitchIn Stock: 1062LS0851505F250C2A Datasheet

SimilarRFQ

MAB104G01C06B01A

APEM Inc.In Stock: 869MAB104G01C06B01A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the V7-2B17D8-213 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Circuit configuration: SPDT
• Switch function: On-Momentary
• Voltage rating: 125V AC minimum
• Mounting type: Chassis Mount
• Termination style: Quick Connect (0.187" or 0.250")
• Current rating: Minimum 11A AC at 125V

Substitution Logic: All identified substitute parts maintain SPDT circuit configuration and on-momentary function. Substitute parts from E-Switch (LS series) and APEM Inc. (MAB series) provide equal or higher current ratings (15A or 16A AC) at 125V, ensuring electrical compatibility. Termination styles include both 0.187" (4.7mm) and 0.250" (6.3mm) quick connect options. Operating temperature ranges vary; E-Switch parts operate -25°C to 85°C, while APEM parts extend to -10°C to 105°C. All substitutes are active products with current RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

E-Switch LS0851505 Series (LS0851505F100C1A, LS0851505F160C1A, LS0851505F250C1A, LS0851505F250C2A):

The E-Switch LS series provides direct electrical substitution with higher current ratings (15A AC) than the original V7-2B17D8-213 (11A AC). All variants maintain 125V AC voltage compatibility and SPDT on-momentary configuration. Three options feature 0.187" (4.7mm) quick connect termination matching the original part, while LS0851505F250C2A provides 0.250" (6.3mm) termination for applications requiring larger contact spacing. All E-Switch variants are active products with ROHS3 compliance and unlimited MSL rating. Operating temperature range (-25°C to 85°C) covers most industrial applications, though the original part's lower temperature limit (-40°C) is not matched.

APEM Inc. MAB104G01C06B01A:

The APEM MAB104G01C06B01A offers the highest current rating (16A AC) and extended operating temperature range (-10°C to 105°C). This part features 0.250" (6.3mm) quick connect termination and is supplied in tray packaging. ROHS3 compliance and unlimited MSL rating align with modern regulatory requirements. Selection of this part is appropriate for applications requiring higher temperature operation or enhanced current margin.

Termination Compatibility:

Applications using 0.187" (4.7mm) quick connect receptacles require LS0851505F100C1A, LS0851505F160C1A, or LS0851505F250C1A. Applications with 0.250" (6.3mm) quick connect receptacles require LS0851505F250C2A or MAB104G01C06B01A.

Compliance Considerations:

All substitute parts maintain RoHS3 compliance and unlimited MSL rating, supporting deployment in regulated environments. The original V7-2B17D8-213 is RoHS Compliant; all substitutes are ROHS3 Compliant, representing current regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can E-Switch LS0851505 series parts directly replace the Honeywell V7-2B17D8-213?

A: Yes, with termination consideration. LS0851505F100C1A, LS0851505F160C1A, and LS0851505F250C1A feature 0.187" (4.7mm) quick connect termination matching the original part. All maintain SPDT circuit, on-momentary function, and 125V AC rating. Higher current ratings (15A vs. 11A) provide additional margin. Operating temperature range (-25°C to 85°C) differs from the original (-40°C to 85°C).

Q: What is the difference between LS0851505F250C1A and LS0851505F250C2A?

A: Both parts are identical except for termination style. LS0851505F250C1A features 0.187" (4.7mm) quick connect termination. LS0851505F250C2A features 0.250" (6.3mm) quick connect termination. Selection depends on receptacle size in the target application.

Q: Does the APEM MAB104G01C06B01A require different mounting hardware?

A: The MAB104G01C06B01A maintains chassis mount configuration compatible with the original part. Termination style is 0.250" (6.3mm) quick connect, requiring receptacles sized for this connector. Packaging is tray format rather than bulk.

Q: Are all substitute parts RoHS compliant?

A: Yes. The original V7-2B17D8-213 is RoHS Compliant. All substitute parts (E-Switch LS series and APEM MAB104) are ROHS3 Compliant, representing current regulatory standards.

Q: What is the mechanical life difference between the original and substitute parts?

A: The original V7-2B17D8-213 specifies 10,000,000 mechanical cycles. E-Switch LS series parts specify 1,000,000 mechanical cycles. APEM MAB104G01C06B01A does not specify mechanical life. For applications requiring extended cycle life, the original specification should be evaluated against actual duty cycle requirements.

Q: Can I use LS0851505F250C2A in an application designed for 0.187" (4.7mm) termination?

A: No. LS0851505F250C2A features 0.250" (6.3mm) quick connect termination and is not compatible with 0.187" (4.7mm) receptacles. Use LS0851505F100C1A, LS0851505F160C1A, or LS0851505F250C1A for 0.187" (4.7mm) applications.

Q: What is the operating force difference among E-Switch variants?

A: LS0851505F100C1A specifies 100gf operating force. LS0851505F160C1A specifies 160gf operating force. LS0851505F250C1A and LS0851505F250C2A specify 250gf operating force. Selection depends on actuator design and required actuation effort.

Q: Is the APEM MAB104G01C06B01A suitable for low-temperature applications?

A: The APEM MAB104G01C06B01A operates from -10°C to 105°C. The original V7-2B17D8-213 operates from -40°C to 85°C. For applications requiring operation below -10°C, the APEM part is not suitable. E-Switch LS series parts operate from -25°C to 85°C, also not covering the original -40°C lower limit.