V60DM45C-M3/I Equivalent & Substitute Parts

Part Overview

The V60DM45C-M3/I is a Schottky diode array manufactured by Vishay General Semiconductor - Diodes Division. This component features a 1 Pair Common Cathode configuration rated for 45 V DC reverse voltage and 30 A average rectified current per diode. The device is housed in a Surface Mount TO-263-3 D2PAK package and is classified as an Active product. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

V60DM45C-M3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 1748V60DM45C-M3/I Datasheet

Current PartRFQ

V60DM45CHM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 2615V60DM45CHM3/I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the V60DM45C-M3/I is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part V60DM45CHM3/I maintains identical specifications for diode configuration, reverse voltage rating, average rectified current, forward voltage characteristics, recovery speed, reverse leakage current, operating temperature range, and package type. Both parts are manufactured by Vishay General Semiconductor - Diodes Division and belong to the eSMP® and TMBS® series.

The key parameters that establish substitution eligibility are:

• Diode Configuration: 1 Pair Common Cathode
• Voltage - DC Reverse (Vr) (Max): 45 V
• Current - Average Rectified (Io) (per Diode): 30 A
• Voltage - Forward (Vf) (Max) @ If: 680 mV @ 30 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Current - Reverse Leakage @ Vr: 1.1 mA @ 45 V
• Operating Temperature - Junction: -40°C ~ 175°C
• Package / Case: TO-263-3, D2PAK (2 Leads + Tab), Variant
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

Both V60DM45C-M3/I and V60DM45CHM3/I are Active products manufactured by Vishay General Semiconductor - Diodes Division and are fully equivalent in electrical and mechanical specifications. Selection between these parts is based on application requirements and compliance certifications.

The V60DM45C-M3/I is suitable for general industrial and commercial applications requiring Schottky diode array functionality with 45 V reverse voltage and 30 A current ratings. This part is ROHS3 Compliant and carries unlimited moisture sensitivity classification.

The V60DM45CHM3/I is qualified to AEC-Q101 automotive standards and carries an Automotive grade designation. This variant is appropriate for automotive and mission-critical applications where automotive qualification is a contractual or regulatory requirement. The V60DM45CHM3/I maintains identical electrical performance and package specifications while providing additional qualification assurance.

Both parts are REACH Unaffected and classified under ECCN EAR99 for export control purposes. Selection should be based on whether automotive qualification is required for the end application.

Frequently Asked Questions (FAQ)

Q: Are V60DM45C-M3/I and V60DM45CHM3/I electrically interchangeable?

A: Yes. Both parts are electrically identical with matching reverse voltage ratings (45 V), average rectified current (30 A per diode), forward voltage characteristics (680 mV @ 30 A), recovery speed (≤ 500 ns), and reverse leakage current (1.1 mA @ 45 V). Operating temperature ranges are identical (-40°C ~ 175°C).

Q: Can I use V60DM45CHM3/I as a direct replacement for V60DM45C-M3/I?

A: Yes, from an electrical and mechanical standpoint. The V60DM45CHM3/I is a parametric equivalent with identical package type (TO-263-3, D2PAK), mounting type (Surface Mount), and all critical electrical specifications. The primary difference is the addition of AEC-Q101 automotive qualification on the V60DM45CHM3/I variant.

Q: What is the difference between these two part numbers?

A: The V60DM45CHM3/I includes AEC-Q101 automotive qualification and carries an Automotive grade designation, while the V60DM45C-M3/I does not specify automotive qualification. All electrical parameters, package specifications, and compliance certifications (ROHS3, REACH Unaffected) are identical.

Q: Are both parts available in the same packaging format?

A: Yes. Both V60DM45C-M3/I and V60DM45CHM3/I are supplied in Tape & Reel (TR) packaging and use the TO-263-3 D2PAK (2 Leads + Tab) Surface Mount package. Moisture sensitivity level is 1 (Unlimited) for both variants.

Q: Which part should I select for an automotive application?

A: The V60DM45CHM3/I is the appropriate selection for automotive applications due to its AEC-Q101 qualification and Automotive grade designation. This qualification ensures the part meets automotive industry reliability and quality standards.

Q: Can I substitute V60DM45C-M3/I with V60DM45CHM3/I in existing designs?

A: Yes. The V60DM45CHM3/I is a direct parametric equivalent with identical electrical specifications and package type. No circuit modifications or PCB layout changes are required. The substitution is valid from both electrical and mechanical perspectives.

Q: Are there any compliance or regulatory differences between these parts?

A: Both parts are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control. The V60DM45CHM3/I carries additional AEC-Q101 automotive qualification. Both parts have unlimited moisture sensitivity classification (MSL 1).