Equivalent & Substitute Parts for V3F6HM3/I

Part Overview

The V3F6HM3/I is an active Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates at 60 V DC reverse voltage with a 3 A average rectified current rating and is housed in a DO-219AB package. The device is qualified to AEC-Q101 automotive standards and complies with ROHS3 and REACH regulations. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

V3F6HM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 1165V3F6HM3/I Datasheet

Current PartRFQ

V3F6-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 8005V3F6-M3/H Datasheet

Parametric EquivalentRFQ

V3F6HM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 8377V3F6HM3/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V3F6HM3/I are identified based on strict equivalence of the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 3 A
• Voltage - Forward (Vf) (Max) @ If: 620 mV @ 3 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 600 µA @ 60 V
• Capacitance @ Vr, F: 310 pF @ 4V, 1MHz
• Technology: Schottky

Mechanical Equivalence Criteria:

• Package / Case: DO-219AB
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -40°C to 150°C

Compliance Equivalence Criteria:

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

All substitute parts listed below meet these criteria and are classified as parametric equivalents within the eSMP® and TMBS® series from Vishay General Semiconductor - Diodes Division.

Parameter Comparison

Engineering Selection Recommendations

V3F6HM3/H is a direct parametric equivalent to the V3F6HM3/I. Both parts carry automotive grade designation and AEC-Q101 qualification. The primary distinction is packaging format: V3F6HM3/I is supplied in Tape & Reel (TR) format, while V3F6HM3/H is also supplied in Tape & Reel (TR) format. Both parts are ROHS3 compliant and REACH unaffected. Selection between these two parts is determined by procurement requirements and inventory availability.

V3F6-M3/H is a parametric equivalent with identical electrical specifications and DO-219AB package configuration. This part differs in that it is available in Cut Tape (CT) and Digi-Reel® packaging options rather than standard Tape & Reel format. The V3F6-M3/H does not carry explicit automotive grade or AEC-Q101 designation in the provided specifications. For applications requiring automotive qualification and AEC-Q101 compliance, V3F6HM3/H is the appropriate selection. For non-automotive applications or where packaging flexibility is prioritized, V3F6-M3/H provides electrical equivalence with alternative distribution formats.

All three parts are active products with current manufacturing status and adequate inventory availability.

Frequently Asked Questions (FAQ)

Q: Can V3F6HM3/H be used as a direct replacement for V3F6HM3/I?

A: Yes. V3F6HM3/H is a parametric equivalent with identical electrical characteristics, package type (DO-219AB), and automotive qualifications (AEC-Q101). Both parts operate at 60 V, 3 A with 620 mV forward voltage drop and fast recovery characteristics. The parts are interchangeable from an electrical and mechanical standpoint.

Q: What is the difference between V3F6HM3/I and V3F6-M3/H?

A: Both parts share identical electrical specifications and DO-219AB surface mount packaging. The primary differences are packaging format (V3F6HM3/I and V3F6HM3/H use Tape & Reel; V3F6-M3/H uses Cut Tape and Digi-Reel®) and automotive qualification status (V3F6HM3/I and V3F6HM3/H carry AEC-Q101 automotive grade; V3F6-M3/H does not carry explicit automotive designation in provided specifications).

Q: Are all substitute parts ROHS3 compliant?

A: Yes. V3F6HM3/I, V3F6HM3/H, and V3F6-M3/H are all ROHS3 compliant and REACH unaffected.

Q: Which part should be selected for automotive applications?

A: For automotive applications requiring AEC-Q101 qualification, select either V3F6HM3/I or V3F6HM3/H. Both parts carry automotive grade designation and AEC-Q101 qualification. V3F6-M3/H does not carry explicit automotive qualification in the provided specifications.

Q: What is the operating temperature range for these diodes?

A: All three parts operate across a junction temperature range of -40°C to 150°C, suitable for industrial and automotive environments.

Q: Do packaging format differences affect electrical performance?

A: No. Packaging format differences (Tape & Reel versus Cut Tape and Digi-Reel®) do not affect electrical performance. These differences relate to distribution and handling methods only. All parts deliver identical electrical characteristics when soldered into circuit applications.

Q: What is the reverse leakage current specification?

A: All three parts specify 600 µA reverse leakage current at 60 V applied reverse voltage.

Q: Are these parts suitable for high-frequency switching applications?

A: Yes. All three parts are specified as fast recovery Schottky diodes with recovery time ≤ 500 ns at currents > 200 mA, making them suitable for switching power supply and high-frequency rectification applications.