V386GLFT LVDS Receiver Interface IC - Equivalent & Substitute Parts

Part Overview

The V386GLFT is an 8-bit LVDS receiver interface IC manufactured by Renesas Electronics Corporation, housed in a 56-TSSOP package. This component is classified as Last Time Buy, indicating limited availability from the original manufacturer. The part operates within a 3V to 3.6V supply voltage range and is designed for surface mount applications requiring LVDS signal reception capabilities.

Due to Last Time Buy status, identifying functionally equivalent substitute parts with matching electrical and mechanical specifications is essential for design continuity and procurement planning.

Substiute Parts

V386GLFT

Renesas Electronics CorporationIn Stock: 791V386GLFT Datasheet

Current PartRFQ

DS90CF384AMTD/NOPB

Texas InstrumentsIn Stock: 1037DS90CF384AMTD/NOPB Datasheet

MFR RecommendedRFQ

DS90CF384AMTDX/NOPB

Texas InstrumentsIn Stock: 3830DS90CF384AMTDX/NOPB Datasheet

MFR RecommendedRFQ

DS90CR286AMTD/NOPB

National SemiconductorIn Stock: 3038DS90CR286AMTD/NOPB Datasheet

MFR RecommendedRFQ

DS90CR288AMTD/NOPB

Texas InstrumentsIn Stock: 1000420DS90CR288AMTD/NOPB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V386GLFT are qualified based on the following critical parameters:

• Voltage Supply Range: 3V ~ 3.6V (exact match required)
• Package Type: 56-TFSOP / 56-TSSOP (identical physical footprint and pin count)
• Mounting Type: Surface Mount (consistent with PCB assembly requirements)
• Interface Category: Specialized interface IC (functional equivalence)
• Regulatory Compliance: ROHS3 and REACH compliance status

The substitute parts listed below meet all mandatory electrical and mechanical compatibility criteria. All candidates operate within the specified voltage range, utilize identical packaging, and maintain surface mount compatibility.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts satisfy the mandatory electrical and mechanical compatibility requirements for the V386GLFT. Selection should be based on the following factors:

DS90CF384AMTD/NOPB and DS90CF384AMTDX/NOPB (Texas Instruments): Both variants maintain Active product status with ROHS3 compliance and REACH Unaffected certification. The AMTDX variant offers higher inventory availability (3792 pcs) in Cut Tape and Digi-Reel packaging, suitable for high-volume procurement. The AMTD variant is available in Tube packaging (972 pcs).

DS90CR288AMTD/NOPB (Texas Instruments): Maintains Active status with ROHS3 compliance and REACH Unaffected certification. Offers the highest inventory availability (1,000,400 pcs) in Tube packaging, providing supply chain security for extended production runs.

DS90CR286AMTD/NOPB (National Semiconductor): Maintains Active status with specified inventory (3000 pcs) in Bulk packaging. Compliance documentation for RoHS and REACH status is not provided in the specification data.

Frequently Asked Questions (FAQ)

Q: Can the DS90CF384AMTDX/NOPB be used as a direct replacement for the V386GLFT?

A: Yes. Both parts operate within the 3V to 3.6V supply voltage range, utilize identical 56-TSSOP packaging with 56-TFSOP case dimensions (0.240", 6.10mm width), and are configured for surface mount assembly. Electrical and mechanical compatibility is established.

Q: What is the difference between DS90CF384AMTD/NOPB and DS90CF384AMTDX/NOPB?

A: Both parts are functionally equivalent with identical electrical specifications and packaging. The primary difference is packaging format: AMTD is supplied in Tube, while AMTDX is supplied in Cut Tape and Digi-Reel format. Selection depends on procurement and assembly line requirements.

Q: Does the MSL rating difference between V386GLFT (MSL 1) and substitute parts (MSL 2) affect compatibility?

A: MSL rating indicates moisture sensitivity during storage and handling. The V386GLFT has unlimited shelf life (MSL 1), while substitute parts have a 1-year shelf life (MSL 2) under controlled conditions. This affects storage protocols but does not impact electrical or mechanical compatibility once the component is installed on the PCB.

Q: Are all substitute parts ROHS3 compliant?

A: DS90CF384AMTD/NOPB, DS90CF384AMTDX/NOPB, and DS90CR288AMTD/NOPB are confirmed ROHS3 compliant. DS90CR286AMTD/NOPB compliance status is not specified in the provided data.

Q: Which substitute part offers the best supply chain availability?

A: DS90CR288AMTD/NOPB provides the highest inventory level (1,000,400 pcs), followed by DS90CF384AMTDX/NOPB (3792 pcs) and DS90CR286AMTD/NOPB (3000 pcs). DS90CF384AMTD/NOPB has the lowest availability (972 pcs).