V386GLF LVDS Receiver Equivalent & Substitute Parts

Part Overview

The V386GLF is an 8-bit LVDS receiver manufactured by Renesas Electronics Corporation, housed in a 56-TSSOP package. This interface component operates at 3V to 3.6V supply voltage and is classified as Last Time Buy status, indicating end-of-life production. Identifying qualified substitute parts is essential for design continuity, inventory management, and long-term product support when original stock becomes unavailable.

Substiute Parts

V386GLF

Renesas Electronics CorporationIn Stock: 2487V386GLF Datasheet

Current PartRFQ

DS90CF384AMTD/NOPB

Texas InstrumentsIn Stock: 1037DS90CF384AMTD/NOPB Datasheet

MFR RecommendedRFQ

DS90CF384AMTDX/NOPB

Texas InstrumentsIn Stock: 3830DS90CF384AMTDX/NOPB Datasheet

MFR RecommendedRFQ

DS90CR286AMTDX/NOPB

National SemiconductorIn Stock: 15389DS90CR286AMTDX/NOPB Datasheet

MFR RecommendedRFQ

FIN3386MTDX

onsemiIn Stock: 1407FIN3386MTDX Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V386GLF are qualified based on the following critical parameters that ensure functional and mechanical compatibility:

Mandatory Matching Parameters:

• Package / Case: 56-TFSOP (0.240", 6.10mm Width)
• Supplier Device Package: 56-TSSOP
• Voltage - Supply: 3V ~ 3.6V
• Mounting Type: Surface Mount
• Category: Interface
• Protocol: LVDS (receiver function)

All four substitute parts listed below meet these core requirements. Substitutes are grouped by manufacturer and product status to facilitate selection based on availability and supply chain strategy.

Parameter Comparison

Engineering Selection Recommendations

DS90CF384AMTDX/NOPB (Texas Instruments) is the primary substitute candidate. This part maintains Active product status with the highest inventory availability (3792 units), ensuring long-term supply continuity. It is supplied in Cut Tape (CT) & Digi-Reel® packaging, suitable for automated assembly. ROHS3 compliance and REACH Unaffected status align with regulatory requirements.

DS90CF384AMTD/NOPB (Texas Instruments) serves as an alternative with identical electrical specifications. Supplied in Tube packaging, this variant is suitable for lower-volume applications or manual assembly processes. Inventory of 972 units supports medium-term availability.

DS90CR286AMTDX/NOPB (National Semiconductor) offers the highest inventory level (15306 units), providing maximum supply security. This part qualifies as a functional equivalent based on package and voltage parameters. Note that RoHS and REACH compliance details are not specified in available documentation.

FIN3386MTDX (onsemi) is a deserializer variant with enhanced specifications (2.38Gbps data rate, 4 LVDS inputs, 28 LVTTL outputs, operating temperature -40°C to 85°C). This part is suitable only when the application requires deserializer functionality beyond basic receiver operation. Inventory of 1306 units supports ongoing availability.

Frequently Asked Questions (FAQ)

Q: Can all four substitute parts be used interchangeably with the V386GLF?

A: All four parts share the mandatory compatibility parameters: 56-TFSOP package, 56-TSSOP supplier package, 3V to 3.6V supply voltage, and surface mount configuration. However, functional equivalence depends on application requirements. The DS90CF384 variants and DS90CR286 are direct receiver replacements. The FIN3386MTDX is a deserializer with additional functionality and should be selected only if deserializer operation is required.

Q: What is the difference between DS90CF384AMTD/NOPB and DS90CF384AMTDX/NOPB?

A: Both parts are electrically identical. The primary difference is packaging: DS90CF384AMTD/NOPB is supplied in Tube packaging, while DS90CF384AMTDX/NOPB is supplied in Cut Tape (CT) & Digi-Reel® format. The Digi-Reel® variant is optimized for high-volume automated assembly. Inventory availability also differs: 972 units (Tube) versus 3792 units (Cut Tape).

Q: Why is the V386GLF marked as Last Time Buy?

A: Last Time Buy status indicates that Renesas Electronics has discontinued production of this part. Existing inventory (2442 units) represents the final available stock. Designers should transition to active substitute parts to ensure long-term supply chain stability.

Q: Are there compliance differences between the substitute parts?

A: DS90CF384AMTDX/NOPB, DS90CF384AMTD/NOPB, and FIN3386MTDX are all ROHS3 compliant and REACH Unaffected. DS90CR286AMTDX/NOPB compliance documentation is not specified. All parts carry EAR99 ECCN classification and 8542.39.0001 HTSUS code, consistent with the original V386GLF.

Q: What is the significance of MSL (Moisture Sensitivity Level) differences?

A: The V386GLF has MSL 1 (Unlimited), meaning it has no moisture sensitivity restrictions. Substitute parts with MSL 2 (1 Year) require controlled storage and handling within one year of packaging. This affects storage procedures and shelf-life management but does not impact electrical performance or functionality.

Q: Which substitute part should be selected for new designs?

A: DS90CF384AMTDX/NOPB is recommended for new designs. It offers Active product status, highest inventory availability (3792 units), optimized packaging for automated assembly, and full regulatory compliance. This selection ensures maximum supply continuity and manufacturing flexibility.