V30DM100C-M3/I Equivalent & Substitute Parts

Part Overview

The V30DM100C-M3/I is a Schottky diode array manufactured by Vishay General Semiconductor - Diodes Division. This component features a 1 Pair Common Cathode configuration rated for 100 V DC reverse voltage and 15 A average rectified current per diode. The device is housed in a Surface Mount TO-263-3 D2PAK package and is part of the eSMP® and TMBS® series. The part maintains Active product status with 1883 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part number becomes unavailable or when specific application requirements necessitate alternative variants.

Substiute Parts

V30DM100C-M3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 1988V30DM100C-M3/I Datasheet

Current PartRFQ

V30DM100CHM3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 2795V30DM100CHM3/I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the V30DM100C-M3/I is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 100 V
• Current - Average Rectified (Io) (per Diode): 15 A
• Voltage - Forward (Vf) (Max) @ If: 810 mV @ 15 A
• Current - Reverse Leakage @ Vr: 400 µA @ 100 V
• Operating Temperature - Junction: -40°C ~ 175°C

Mechanical & Packaging Parameters:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Mounting Type: Surface Mount
• Package / Case: TO-263-3, D2PAK (2 Leads + Tab), Variant

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts must match all electrical, mechanical, and compliance parameters to ensure functional and physical interchangeability. The V30DM100CHM3/I meets these criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the V30DM100C-M3/I and V30DM100CHM3/I are Active products manufactured by Vishay General Semiconductor - Diodes Division and maintain identical electrical and mechanical specifications. Both components are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

The V30DM100CHM3/I carries Automotive grade designation with AEC-Q101 qualification, indicating suitability for automotive applications requiring enhanced reliability and qualification standards. The standard-grade V30DM100C-M3/I is suitable for general industrial and commercial applications.

Selection between these parts should be based on application requirements: choose the automotive-qualified V30DM100CHM3/I for automotive or mission-critical applications; select the V30DM100C-M3/I for standard industrial applications where automotive qualification is not required.

Current inventory levels show 2723 units of V30DM100CHM3/I and 1883 units of V30DM100C-M3/I in stock, supporting procurement flexibility.

Frequently Asked Questions (FAQ)

Q: Are the V30DM100C-M3/I and V30DM100CHM3/I electrically interchangeable?

A: Yes. Both parts share identical electrical specifications including 100 V DC reverse voltage rating, 15 A average rectified current per diode, 810 mV forward voltage at 15 A, and 400 µA reverse leakage current at 100 V. Operating temperature range, fast recovery speed characteristics, and all other electrical parameters are identical.

Q: What is the difference between these two part numbers?

A: The V30DM100CHM3/I is qualified to AEC-Q101 automotive standards and carries Automotive grade designation. The V30DM100C-M3/I is a standard-grade variant without automotive qualification. All electrical and mechanical parameters remain identical.

Q: Can I use the V30DM100CHM3/I in place of the V30DM100C-M3/I?

A: Yes. The V30DM100CHM3/I is a direct substitute with identical electrical and mechanical specifications. The automotive qualification and grade designation of the V30DM100CHM3/I do not restrict its use in standard applications.

Q: Can I use the V30DM100C-M3/I in place of the V30DM100CHM3/I in automotive applications?

A: The V30DM100C-M3/I lacks AEC-Q101 automotive qualification. For applications requiring automotive-grade components or AEC-Q101 compliance, the V30DM100CHM3/I is the appropriate selection.

Q: Are the packages identical?

A: Yes. Both parts use the TO-263-3 D2PAK (2 Leads + Tab) Surface Mount package with identical pinout and footprint. The supplier device package designation TO-263AC (SMPD) is identical for both parts.

Q: What is the moisture sensitivity level for these components?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are both parts RoHS compliant?

A: Yes. Both the V30DM100C-M3/I and V30DM100CHM3/I are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations.

Q: What is the operating temperature range?

A: Both parts operate across a junction temperature range of -40°C to 175°C, supporting applications across industrial and automotive temperature extremes.