Equivalent & Substitute Parts Reference for V2PL45LHM3/H

Part Overview

The Vishay V2PL45LHM3/H is a Schottky diode in the Diodes, Rectifiers category, designed for surface mount applications with a maximum reverse voltage of 45 V and an average rectified current of 2A. It is supplied in the DO-220AA (SMP) package, supports automotive grade (AEC-Q101 qualification), and is compliant with ROHS3 and REACH standards. The part is actively available, but identifying substitute models is essential for maintaining uninterrupted supply, ensuring design flexibility, and supporting engineering change processes if procurement or supply chain limitations occur.

Substiute Parts

V2PL45LHM3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 1138V2PL45LHM3/H Datasheet

Current PartRFQ

V2PL45L-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 1536V2PL45L-M3/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification is strictly based on matching critical electrical and mechanical parameters. Only parts with the following aligned parameters are considered equivalent for substitution in this category: manufacturer, technology (Schottky), maximum reverse voltage (45 V), average rectified current (2A), voltage - forward (530 mV @ 2A), speed, reverse leakage, capacitance, qualification (AEC-Q101), package (DO-220AA/SMP), mounting type (surface mount), operating temperature range, RoHS/REACH status, and Moisture Sensitivity Level (1). No parts outside these parametric constraints are recognized as suitable substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both V2PL45LHM3/H and V2PL45L-M3/H are active products, AEC-Q101 qualified for automotive grade usage, ROHS3 compliant, and REACH unaffected. Moisture sensitivity level is 1 (Unlimited) for both. Selection between these parts can be based solely on product availability and required compliance without the need for additional qualification steps.

Frequently Asked Questions (FAQ)

Q1: What are the key criteria for substituting V2PL45LHM3/H in a design?
A1: Substitution is permissible when electrical and mechanical parameters—including voltage, current, package, mounting type, temperature range, qualification standard, and compliance statuses—are identical.

Q2: Can V2PL45L-M3/H be used as a direct substitute for V2PL45LHM3/H?
A2: Yes, V2PL45L-M3/H matches all key parameters with V2PL45LHM3/H, including electrical, packaging, qualification, and compliance requirements.

Q3: Are package and MSL level identical for both parts?
A3: Yes, both use the DO-220AA (SMP) package with surface mount configuration and Moisture Sensitivity Level 1 (Unlimited).

Q4: Is further testing or verification required when substituting within this part group?
A4: Substitution between V2PL45LHM3/H and V2PL45L-M3/H is supported by full parametric equivalence as defined and does not require further consideration of technical differences within provided parameters.

Q5: Are both substitute parts recognized for automotive-grade usage?
A5: Yes, both are AEC-Q101 qualified and suitable for automotive-grade designs as per provided information.