V14P460PL2T7 Equivalent & Substitute Parts

Part Overview

The V14P460PL2T7 is a 750 V radial varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This transient voltage suppressor is designed for through-hole mounting in a 14mm disc package and provides surge current protection up to 6 kA with energy absorption of 180J. The part is actively produced and fully compliant with RoHS3 and REACH regulations. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across supply channels.

Substiute Parts

V14P460PL2T7

Littelfuse Inc.In Stock: 776V14P460PL2T7 Datasheet

Current PartRFQ

V14P460PL2A7

Littelfuse Inc.In Stock: 4097V14P460PL2A7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V14P460PL2T7 has one parametric equivalent: V14P460PL2A7. Substitution is valid based on the following criteria:

All electrical parameters are identical: Maximum AC voltage (460 V), maximum DC voltage (615 V), varistor voltage range (675 V minimum to 825 V maximum, 750 V typical), surge current (6 kA), and energy absorption (180J) are unchanged.

All mechanical parameters are identical: Both parts use the same 14mm disc package and through-hole mounting configuration.

Operating temperature range is identical: -55°C to 125°C.

Compliance certifications are identical: Both parts maintain ROHS3 compliance and REACH unaffected status.

The only difference is packaging format: V14P460PL2T7 is supplied in Tape & Reel (TR) format, while V14P460PL2A7 is supplied in Cut Tape (CT) format. This distinction affects procurement and handling but does not impact electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both V14P460PL2T7 and V14P460PL2A7 are active products from Littelfuse Inc. with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

V14P460PL2T7 in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required.

V14P460PL2A7 in Cut Tape format is suitable for lower-volume applications, manual assembly, or situations where individual component handling is preferred.

Both parts satisfy ROHS3 compliance and REACH regulatory requirements. No additional testing or verification is required when substituting between these two formats, provided the application's packaging and handling infrastructure supports the selected format.

Frequently Asked Questions (FAQ)

Q: Can V14P460PL2A7 be used as a direct replacement for V14P460PL2T7?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Substitution is valid for any application where the packaging format is compatible with assembly processes.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place equipment. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly or lower-volume production. Both formats contain the same component.

Q: Are there any electrical performance differences between the two part numbers?

A: No. Both parts have identical electrical specifications: 750 V typical varistor voltage, 6 kA surge current, 180J energy absorption, and -55°C to 125°C operating temperature range.

Q: Do both parts meet the same compliance standards?

A: Yes. Both V14P460PL2T7 and V14P460PL2A7 are ROHS3 compliant and REACH unaffected.

Q: Which part should be selected for high-volume manufacturing?

A: V14P460PL2T7 in Tape & Reel format is optimized for high-volume automated assembly. V14P460PL2A7 in Cut Tape format is suitable for lower-volume or manual assembly scenarios.