V14P150 Equivalent & Substitute Parts

Part Overview

The V14P150 is a 240 V, 6 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This through-hole disc component (14mm) is designed for transient voltage suppression applications requiring single-circuit protection. The part is currently Active in product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when identical electrical and mechanical specifications are maintained across alternative packaging or inventory configurations.

Substiute Parts

V14P150

Littelfuse Inc.In Stock: 735V14P150 Datasheet

Current PartRFQ

V14E150P

Littelfuse Inc.In Stock: 85973V14E150P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V14E150P qualifies as a parametric equivalent to the V14P150 based on the following substitution criteria:

• Identical electrical specifications: 240 V typical varistor voltage, 6 kA surge current, 60 J energy rating, 800 pF capacitance
• Identical mechanical specifications: Through-hole mounting, 14mm disc package
• Identical circuit configuration: Single-circuit design
• Identical operating temperature range: -55°C to 85°C
• Identical compliance status: ROHS3 compliant, EAR99 classification

The primary distinction between these parts is packaging configuration: V14P150 is supplied in standard packaging, while V14E150P is supplied in bulk packaging. Both parts are manufactured by Littelfuse Inc. within the UltraMOV™ series and maintain Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both V14P150 and V14E150P are Active products with identical electrical and mechanical specifications, making them functionally interchangeable in circuit applications. Selection between these parts should be based on procurement requirements:

• V14P150: Standard packaging configuration, suitable for standard component procurement workflows
• V14E150P: Bulk packaging configuration, suitable for high-volume manufacturing or inventory consolidation

Both parts maintain ROHS3 compliance and carry identical regulatory classifications (EAR99, HTSUS 8533.40.4000). The choice between these variants does not affect circuit performance, thermal characteristics, or compliance status.

Frequently Asked Questions (FAQ)

Q: Can V14E150P be used as a direct replacement for V14P150?

A: Yes. Both parts are electrically and mechanically identical, with matching varistor voltage (240 V typical), surge current (6 kA), energy rating (60 J), and package specifications (14mm disc, through-hole). The only difference is packaging configuration (standard vs. bulk).

Q: What determines substitution eligibility for these TVS varistors?

A: Substitution is valid when the following parameters match: maximum AC/DC voltage ratings, varistor voltage range, surge current capacity, energy rating, circuit count, capacitance, operating temperature range, mounting type, and package dimensions. Both parts meet all these criteria.

Q: Are there any compliance or certification differences between V14P150 and V14E150P?

A: No. Both parts carry identical compliance certifications: ROHS3 compliant, MSL 1 (unlimited), EAR99 classification, and HTSUS code 8533.40.4000.

Q: Does packaging type affect electrical performance?

A: No. Packaging type (standard vs. bulk) is a supply chain and logistics consideration only. It does not affect the electrical characteristics, thermal performance, or reliability of the component.

Q: What is the operating temperature range for both parts?

A: Both V14P150 and V14E150P operate across -55°C to 85°C ambient temperature range.