V14E130PL2T7 Equivalent & Substitute Parts

Part Overview

The V14E130PL2T7 is a 205 V, 6 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse in the UltraMOV™ series. This through-hole disc varistor (14mm) is designed for transient voltage protection in electronic circuits. The part is Active status and ROHS3 compliant. Substitute parts may be required due to packaging format availability, inventory constraints, or specific application requirements where alternative packaging configurations are acceptable.

Substiute Parts

V14E130PL2T7

LittelfuseIn Stock: 745V14E130PL2T7 Datasheet

Current PartRFQ

TMOV14RP130EL2T7

Littelfuse Inc.In Stock: 2346TMOV14RP130EL2T7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the V14E130PL2T7 is determined by strict equivalence across the following critical electrical and mechanical parameters:

• Varistor Voltage (Typ): 205 V
• Current - Surge: 6 kA
• Energy: 50 J
• Maximum AC Volts: 130 V
• Maximum DC Volts: 170 V
• Mounting Type: Through Hole
• Package / Case: Disc 14mm
• Number of Circuits: 1
• Operating Temperature Range: -55°C to 85°C

The primary difference between the main part and substitute parts is the packaging format (Tape & Reel versus Cut Tape). Both packaging configurations deliver identical electrical performance and mechanical compatibility. The substitute part TMOV14RP130EL2T7 maintains all critical electrical specifications and physical dimensions required for direct functional replacement.

Parameter Comparison

Engineering Selection Recommendations

Both the V14E130PL2T7 and TMOV14RP130EL2T7 are Active status products from Littelfuse with identical electrical specifications and compliance certifications. Selection between these parts should be based on packaging requirements and inventory availability:

• V14E130PL2T7 is supplied in Tape & Reel (TR) format, suitable for automated assembly processes.
• TMOV14RP130EL2T7 is supplied in Cut Tape (CT) format, suitable for manual assembly or lower-volume applications.

Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for storage or handling. Either part provides equivalent transient voltage suppression performance for 205 V, 6 kA applications with identical thermal and electrical operating ranges.

Frequently Asked Questions (FAQ)

Q: Can TMOV14RP130EL2T7 be used as a direct replacement for V14E130PL2T7?

A: Yes. Both parts are electrically and mechanically equivalent. The only difference is packaging format (Tape & Reel versus Cut Tape). All electrical parameters, physical dimensions, and compliance certifications are identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is used for high-volume automated assembly lines where components are fed directly into pick-and-place machines. Cut Tape (CT) packaging provides individual component strips suitable for manual assembly or lower-volume production runs. Both formats contain the same component.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts operate across the same temperature range (-55°C to 85°C), have identical surge current ratings (6 kA), energy dissipation (50 J), and varistor voltage specifications (205 V typical).

Q: Do both parts meet the same compliance standards?

A: Yes. Both V14E130PL2T7 and TMOV14RP130EL2T7 are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.

Q: What does MSL 1 (Unlimited) mean for storage?

A: MSL 1 indicates the component has no moisture sensitivity. These parts can be stored indefinitely without special moisture control measures or baking requirements prior to assembly.