V130LU5P Equivalent & Substitute Parts

Part Overview

The V130LU5P is a 205 V, 2.5 kA disc varistor manufactured by Littelfuse Inc., designed for transient voltage suppression in through-hole applications. This component is classified as an active product with full RoHS3 compliance and REACH unaffected status. Substitute parts are identified when electrical parameters, mechanical form factor, and compliance certifications remain equivalent, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

V130LU5P

Littelfuse Inc.In Stock: 972V130LU5P Datasheet

Current PartRFQ

V130LS5P

Littelfuse Inc.In Stock: 5890V130LS5P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V130LS5P qualifies as a parametric equivalent to the V130LU5P based on the following criteria:

Electrical Parameters Match:

• Maximum AC Volts: 130 V
• Maximum DC Volts: 175 V
• Varistor Voltage (Typical): 205 V
• Current - Surge: 2.5 kA
• Energy: 20 J
• Number of Circuits: 1
• Capacitance @ Frequency: 450 pF @ 1 MHz
• Operating Temperature Range: -55°C to 85°C

Mechanical Parameters Match:

• Mounting Type: Through Hole
• Package / Case: Disc 10mm

Compliance & Status Match:

• Manufacturer: Littelfuse Inc.
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

The only difference between these parts is the packaging format: V130LU5P is supplied in Tape & Reel (TR), while V130LS5P is supplied in Cut Tape (CT). This distinction affects procurement and assembly processes but does not alter electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both V130LU5P and V130LS5P are active products from Littelfuse Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

V130LU5P (Tape & Reel): Suitable for high-volume automated assembly operations where tape-and-reel packaging optimizes pick-and-place machine compatibility and reduces handling time.

V130LS5P (Cut Tape): Suitable for lower-volume applications, manual assembly, or situations where smaller packaging quantities are preferred.

Both parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across all markets. The identical operating temperature range (-55°C to 85°C) and moisture sensitivity level (MSL 1) confirm equivalent environmental performance.

Frequently Asked Questions (FAQ)

Q: Can V130LS5P replace V130LU5P in existing designs? A: Yes. All electrical parameters, mechanical dimensions, and compliance certifications are identical. The only difference is packaging format (Cut Tape vs. Tape & Reel), which does not affect circuit performance.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, optimized for automated assembly. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume applications. Both formats contain the same component.

Q: Are there any thermal or electrical performance differences between these parts? A: No. Both parts have identical maximum AC/DC voltage ratings, surge current capacity, energy dissipation, and operating temperature range. They perform identically in circuit applications.

Q: Do both parts meet the same compliance standards? A: Yes. Both V130LU5P and V130LS5P are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity levels (MSL 1).

Q: Which part should I specify for new designs? A: Selection depends on your assembly process. For automated high-volume production, specify V130LU5P (Tape & Reel). For manual assembly or lower volumes, V130LS5P (Cut Tape) may be more practical. Both are functionally equivalent.