V130LU10AP Equivalent & Substitute Parts

Part Overview

The V130LU10AP is a 205 V, 4.5 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in a through-hole disc configuration (14mm). This component is designed for transient overvoltage protection in electronic circuits operating at 130 V AC maximum. The part is currently in active production status with full RoHS3 compliance and REACH unaffected designation.

Equivalent and substitute parts are identified when identical electrical performance parameters and mechanical compatibility are maintained across different packaging formats or series variants from the same manufacturer.

Substiute Parts

V130LU10AP

Littelfuse Inc.In Stock: 1183V130LU10AP Datasheet

Current PartRFQ

V130LS10AP

LittelfuseIn Stock: 4750V130LS10AP Datasheet

Parametric EquivalentRFQ

V130LT10AP

Littelfuse Inc.In Stock: 7192V130LT10AP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V130LU10AP are qualified based on strict electrical and mechanical parameter matching:

Qualifying Parameters for Substitution:

• Maximum AC Volts: 130 V
• Maximum DC Volts: 175 V
• Varistor Voltage (Typical): 205 V
• Varistor Voltage Range: 184.5 V (Min) to 225.5 V (Max)
• Current - Surge: 4.5 kA
• Energy: 38 J
• Number of Circuits: 1
• Mounting Type: Through Hole
• Package / Case: Disc 14mm
• Operating Temperature: -55°C to 85°C
• Capacitance @ 1 MHz: 1000 pF

The V130LU10AP differs from its substitutes only in packaging format (Tape & Reel vs. Cut Tape) and series designation (LU vs. LS/LT). These differences do not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—V130LU10AP, V130LS10AP, and V130LT10AP—are electrically and mechanically identical. Selection between them is determined by procurement and assembly requirements:

V130LU10AP (Tape & Reel): Suitable for high-volume automated assembly operations where components are fed from continuous tape reels.

V130LS10AP (Cut Tape): Appropriate for lower-volume production runs or manual assembly processes where individual component access is required.

V130LT10AP (Cut Tape): Functionally equivalent to V130LS10AP with identical electrical specifications and cut tape packaging.

All parts maintain active production status, full RoHS3 compliance, and REACH unaffected designation. No additional testing or qualification is required when substituting between these part numbers in the same application circuit.

Frequently Asked Questions (FAQ)

Q: Can V130LS10AP or V130LT10AP be used as direct replacements for V130LU10AP?

A: Yes. All three parts have identical electrical parameters (130 V AC maximum, 175 V DC maximum, 205 V typical varistor voltage, 4.5 kA surge current, 38 J energy rating) and mechanical specifications (through-hole mounting, 14mm disc package). The only difference is packaging format (tape & reel vs. cut tape).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly. Cut Tape (CT) packaging provides components on tape segments, typically used for manual assembly or lower-volume production. Both formats contain identical components.

Q: Are there any compliance or certification differences between these parts?

A: No. All three parts carry identical RoHS3 compliance, REACH unaffected status, MSL rating of 1 (Unlimited), and ECCN/HTSUS classifications.

Q: Can these parts be mixed in the same production batch?

A: Yes, provided the assembly process accommodates both packaging formats. The electrical and mechanical performance is identical across all three part numbers.

Q: What inventory considerations apply to these substitutes?

A: V130LT10AP has the highest current inventory (7,182 pcs), followed by V130LS10AP (4,687 pcs) and V130LU10AP (1,102 pcs). Availability may influence part selection for time-sensitive projects.