V130LT5P Equivalent & Substitute Parts

Part Overview

The V130LT5P is a 205 V, 2.5 kA disc varistor manufactured by Littelfuse Inc., designed for transient voltage suppression applications. This through-hole component operates across a temperature range of -55°C to 85°C and is ROHS3 compliant. The part is currently in active production status with 830 units available in tape and reel packaging. Substitute parts are identified when electrical performance parameters, mechanical form factor, and compliance certifications remain equivalent across different packaging configurations.

Substiute Parts

V130LT5P

Littelfuse Inc.In Stock: 860V130LT5P Datasheet

Current PartRFQ

V130LS5P

Littelfuse Inc.In Stock: 5890V130LS5P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V130LS5P qualifies as a parametric equivalent to the V130LT5P based on the following substitution criteria:

Electrical Parameters (Identical):

• Maximum AC Volts: 130 V
• Maximum DC Volts: 175 V
• Varistor Voltage Range: 184.5 V (Min) to 225.5 V (Max), 205 V (Typical)
• Current - Surge: 2.5 kA
• Energy Dissipation: 20 J
• Capacitance @ 1 MHz: 450 pF
• Operating Temperature: -55°C to 85°C

Mechanical Parameters (Identical):

• Mounting Type: Through Hole
• Package / Case: Disc 10mm
• Number of Circuits: 1

Compliance & Status (Identical):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Product Status: Active

Packaging Difference: The primary distinction between V130LT5P and V130LS5P is the supply format: V130LT5P is supplied in Tape & Reel (TR) packaging, while V130LS5P is supplied in Cut Tape (CT) packaging. Both formats contain identical components with no electrical or mechanical performance variation.

Parameter Comparison

Engineering Selection Recommendations

Both V130LT5P and V130LS5P are active production components from Littelfuse Inc. with identical electrical and mechanical specifications. Selection between these parts is determined by assembly process requirements and inventory logistics rather than performance characteristics.

V130LT5P (Tape & Reel): Suitable for automated pick-and-place assembly operations where continuous tape feeding is required. Tape & reel packaging optimizes high-volume production workflows.

V130LS5P (Cut Tape): Suitable for manual assembly, low-volume production, or applications where individual component handling is preferred. Cut tape packaging provides flexibility for mixed-component assembly processes.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across industrial and commercial applications. The operating temperature range of -55°C to 85°C supports deployment in standard and extended environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can V130LS5P replace V130LT5P in production? A: Yes. Both parts are electrically and mechanically identical. The substitution is valid when assembly equipment can accommodate cut tape format instead of tape and reel format.

Q: What is the difference between Tape & Reel and Cut Tape packaging? A: Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated assembly machines. Cut Tape (CT) packaging supplies components on tape segments, suitable for manual assembly or lower-volume production runs. The components themselves are identical.

Q: Are there any performance differences between V130LT5P and V130LS5P? A: No. Both parts have identical electrical performance, surge current rating (2.5 kA), varistor voltage (205 V typical), energy dissipation (20 J), and operating temperature range (-55°C to 85°C).

Q: Do both parts meet the same compliance standards? A: Yes. Both V130LT5P and V130LS5P are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity level (MSL 1 - Unlimited).

Q: Which part should I select for my application? A: Selection depends on your assembly process. Use V130LT5P for automated assembly with tape and reel equipment. Use V130LS5P for manual assembly or when cut tape format is preferred. Both deliver identical circuit protection performance.

Q: Can I mix V130LT5P and V130LS5P in the same production batch? A: Yes, provided your assembly equipment can handle both packaging formats. Since the components are identical, mixing packaging formats does not affect circuit performance or reliability.