V130LS5PX2855 Equivalent & Substitute Parts

Part Overview

The V130LS5PX2855 is a 205 V, 2.5 kA disc varistor manufactured by Littelfuse Inc., designed for transient voltage suppression in through-hole applications. This component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified based on identical electrical performance parameters and compatible mechanical specifications, enabling direct replacement in circuit designs where packaging format flexibility is acceptable.

Substiute Parts

V130LS5PX2855

Littelfuse Inc.In Stock: 675V130LS5PX2855 Datasheet

Current PartRFQ

V130LS5P

Littelfuse Inc.In Stock: 5890V130LS5P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the V130LS5PX2855 is determined by matching the following critical electrical and mechanical parameters:

• Varistor voltage range: 184.5 V – 225.5 V (typical 205 V)
• Surge current capacity: 2.5 kA
• Energy absorption: 20 J
• Number of circuits: 1
• Mounting type: Through Hole
• Package form factor: Disc 10mm
• Operating temperature range: -55°C to 85°C
• Compliance certifications: RoHS3, REACH unaffected

The V130LS5P meets all substitution criteria with identical electrical specifications. The primary distinction between these parts is packaging format: V130LS5PX2855 is supplied in Tape & Reel (TR) configuration, while V130LS5P is supplied in Cut Tape (CT) configuration. Both parts are manufactured by Littelfuse Inc. within the LS series and maintain Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both V130LS5PX2855 and V130LS5P are Active status components with identical electrical and thermal specifications. Selection between these parts should be based on procurement and assembly requirements:

• V130LS5PX2855 (Tape & Reel): Suitable for high-volume automated assembly processes requiring continuous reel feeding.
• V130LS5P (Cut Tape): Suitable for lower-volume applications, manual assembly, or situations where individual component handling is preferred.

Both parts maintain full RoHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across all markets. Moisture sensitivity level 1 (Unlimited) indicates no special storage or handling requirements for either variant.

Frequently Asked Questions (FAQ)

Q: Can V130LS5P be used as a direct replacement for V130LS5PX2855?

A: Yes. Both parts are electrically and mechanically identical, with varistor voltage of 205 V (184.5 V – 225.5 V range), 2.5 kA surge current, and 20 J energy absorption. The only difference is packaging format: Tape & Reel versus Cut Tape. Circuit performance is unaffected by this distinction.

Q: What determines substitution eligibility for this varistor?

A: Substitution is valid when the following parameters match: varistor voltage range (184.5 V – 225.5 V), surge current (2.5 kA), energy absorption (20 J), number of circuits (1), mounting type (Through Hole), package form (Disc 10mm), and operating temperature range (-55°C to 85°C).

Q: Are there any compliance differences between these parts?

A: No. Both V130LS5PX2855 and V130LS5P carry identical certifications: RoHS3 Compliant, REACH Unaffected, EAR99 classification, and HTSUS code 8533.40.4000. Moisture sensitivity level is 1 (Unlimited) for both variants.

Q: Does packaging format affect circuit performance?

A: No. Tape & Reel and Cut Tape packaging formats are supply configurations only. Once the component is installed on the circuit board, electrical and thermal performance is identical between V130LS5PX2855 and V130LS5P.

Q: What is the inventory status of substitute parts?

A: V130LS5PX2855 (Tape & Reel) has 622 pieces in stock. V130LS5P (Cut Tape) has 5877 pieces in stock. Both are new original components from Littelfuse Inc.