V130LC2 Equivalent & Substitute Parts

Part Overview

The V130LC2 is a 205 V, 1.2 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse in a through-hole disc 7mm package. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design support and procurement. The V130LC2 series provides transient voltage suppression across a single circuit with specified energy absorption capacity suitable for industrial and commercial applications requiring overvoltage protection.

Substiute Parts

V130LC2

LittelfuseIn Stock: 989V130LC2 Datasheet

Current PartRFQ

V130LC2P

Littelfuse Inc.In Stock: 755V130LC2P Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the V130LC2 is determined by strict equivalence across the following critical parameters:

• Maximum AC Volts: 130 V
• Maximum DC Volts: 175 V
• Varistor Voltage (Typical): 205 V
• Current - Surge: 1.2 kA
• Energy: 11 J
• Number of Circuits: 1
• Mounting Type: Through Hole
• Package / Case: Disc 7mm
• Operating Temperature Range: -55°C to 85°C
• RoHS Compliance: ROHS3 Compliant

The V130LC2P qualifies as a direct substitute based on identical electrical specifications and mechanical form factor. The primary distinction is product status: V130LC2P is active, whereas V130LC2 is obsolete. Both parts maintain the same LC series designation and are manufactured by Littelfuse.

Parameter Comparison

Engineering Selection Recommendations

The V130LC2P is the appropriate substitute for the obsolete V130LC2. Both parts are ROHS3 compliant and maintain identical electrical and mechanical specifications. The V130LC2P carries active product status, ensuring continued availability and manufacturing support from Littelfuse. Selection of V130LC2P eliminates obsolescence risk while preserving full functional equivalence in circuit protection applications requiring 205 V varistor voltage and 1.2 kA surge current capacity.

Frequently Asked Questions (FAQ)

Q: Can V130LC2P be used as a direct replacement for V130LC2?

A: Yes. V130LC2P is electrically and mechanically identical to V130LC2 across all specified parameters, including varistor voltage, surge current, energy absorption, package form factor, and operating temperature range. The primary difference is product status: V130LC2P is active while V130LC2 is obsolete.

Q: Are there any packaging differences between V130LC2 and V130LC2P?

A: Both parts use identical through-hole disc 7mm packaging. No PCB layout or mechanical modifications are required for substitution.

Q: What is the moisture sensitivity level for these parts?

A: Both V130LC2 and V130LC2P carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are both parts RoHS compliant?

A: Yes. Both V130LC2 and V130LC2P are ROHS3 compliant and carry identical ECCN (EAR99) and HTSUS (8533.40.4000) classifications.

Q: Why is V130LC2 classified as obsolete?

A: Obsolescence classification reflects Littelfuse's product lifecycle management. The V130LC2P provides continued access to equivalent functionality with active manufacturing support.