V12P10HM3_A/I Equivalent & Substitute Parts

Part Overview

The V12P10HM3_A/I is an automotive-grade Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates at 120 V DC reverse voltage with an average rectified current rating of 3.9 A and is housed in a TO-277A (SMPC) package. The device is qualified to AEC-Q101 automotive standards and maintains active product status. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

V12P10HM3_A/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 6809V12P10HM3_A/I Datasheet

Current PartRFQ

V12P12HM3_A/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 16704V12P12HM3_A/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V12P10HM3_A/I are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

Critical Matching Parameters:

• Voltage - DC Reverse (Vr) (Max): 120 V
• Current - Average Rectified (Io): 3.9 A
• Voltage - Forward (Vf) (Max) @ If: 830 mV @ 10 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Current - Reverse Leakage @ Vr: 400 µA @ 120 V
• Package / Case: TO-277, 3-PowerDFN
• Mounting Type: Surface Mount
• Operating Temperature - Junction: -40°C ~ 150°C
• Technology: Schottky
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Packaging format variations (Tape & Reel versus Cut Tape & Digi-Reel) do not affect electrical or mechanical compatibility and are considered interchangeable for component selection purposes.

Parameter Comparison

Engineering Selection Recommendations

The V12P12HM3_A/H is a direct parametric equivalent to the V12P10HM3_A/I. Both components are manufactured by Vishay General Semiconductor - Diodes Division and share identical electrical specifications, mechanical dimensions, and thermal characteristics. Both devices maintain active product status and carry AEC-Q101 automotive qualification, confirming suitability for automotive applications.

The primary distinction between these parts is packaging format: the V12P10HM3_A/I is supplied in Tape & Reel (TR) format, while the V12P12HM3_A/H is available in Cut Tape (CT) & Digi-Reel® format. This packaging difference does not affect component performance, pin configuration, or board-level compatibility. Selection between these parts should be based on procurement requirements, inventory availability, and supply chain logistics rather than technical performance criteria.

Both parts comply with ROHS3 regulations, maintain MSL 1 (Unlimited) moisture sensitivity classification, and operate across the identical temperature range of -40°C to 150°C junction temperature. Current inventory levels show 6,705 units of V12P10HM3_A/I and 16,600 units of V12P12HM3_A/H available as new original stock.

Frequently Asked Questions (FAQ)

Q: Can V12P12HM3_A/H be used as a direct replacement for V12P10HM3_A/I?

A: Yes. The V12P12HM3_A/H is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including voltage rating, current capacity, forward voltage drop, switching speed, reverse leakage current, package type, and thermal range match exactly. The components are interchangeable at the circuit level.

Q: What is the difference between these two part numbers?

A: The V12P10HM3_A/I and V12P12HM3_A/H differ only in packaging format. The V12P10HM3_A/I is supplied in Tape & Reel (TR) format, while the V12P12HM3_A/H is supplied in Cut Tape (CT) & Digi-Reel® format. Electrical performance and physical dimensions are identical.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the V12P10HM3_A/I and V12P12HM3_A/H carry automotive-grade classification and AEC-Q101 qualification, confirming their suitability for automotive circuit applications.

Q: Do these parts have the same thermal operating range?

A: Yes. Both components operate across the identical junction temperature range of -40°C to 150°C.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical moisture sensitivity level (MSL 1 - Unlimited) classification.

Q: Which part should be selected based on availability?

A: Selection should be based on procurement requirements and supply chain logistics. The V12P12HM3_A/H currently has higher inventory availability (16,600 units) compared to the V12P10HM3_A/I (6,705 units). Both parts are active products with no planned discontinuation.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since the parts are parametric equivalents with identical electrical and mechanical specifications, they can be used interchangeably within the same circuit design and production environment.