Equivalent & Substitute Parts for V10PWM45-M3/I

Part Overview

The Vishay General Semiconductor V10PWM45-M3/I is an active Schottky rectifier diode designed for surface mount installation. It features a 45 V maximum reverse DC voltage, 10A average rectified current, fast recovery speed, and automotive qualification (AEC-Q101). It is packaged in SlimDPAK (TO-252-3, DPAK) format and is ROHS3 compliant. Identifying alternative models with equivalent electrical, mechanical, and regulatory characteristics is necessary when addressing supply shortages, multi-sourcing requirements, or qualification needs.

Substiute Parts

V10PWM45-M3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 5342V10PWM45-M3/I Datasheet

Current PartRFQ

V10PWM45-M3/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 5342V10PWM45-M3/I Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by exact matching of the following key parameters: voltage - DC reverse (Vr) (max), current - average rectified (Io), voltage - forward (Vf) (max) at If, recovery speed, current - reverse leakage at Vr, capacitance at specified test conditions, automotive grade and qualification, mounting type, package/case, operating temperature range, RoHS compliance, MSL (Moisture Sensitivity Level), and REACH status. Only products matching these criteria are listed as parametric equivalents.

Parameter Comparison

Engineering Selection Recommendations

Selection between the main and equivalent substitute part numbers is determined by active product status, ROHS3 compliance, automotive AEC-Q101 qualification, and consistent regulatory certifications. Both provided part numbers meet these requirements.

Frequently Asked Questions (FAQ)

Q1: What criteria must a Schottky rectifier substitute meet for V10PWM45-M3/I?
A1: Substitute parts must match the voltage - DC reverse (Vr) (max), current - average rectified (Io), voltage - forward (Vf) (max) at If, speed, reverse leakage current at rated voltage, capacitance at stated test conditions, automotive grade, AEC-Q101 qualification, mounting type, package, operating temperature, RoHS status, MSL, and REACH status.

Q2: Is package compatibility necessary when selecting a substitute?
A2: Yes, the substitute must use the same mounting type and package/case, specifically TO-252-3, DPAK (2 Leads + Tab), SC-63.

Q3: How is compliance with regulatory and automotive requirements ensured?
A3: Both main and substitute part numbers are certified to AEC-Q101, ROHS3 compliant, and REACH unaffected, matching regulatory and automotive quality standards.

Q4: Are there any differences between the original and substitute part listed here?
A4: The part numbers are identical, indicating all key parameters and compliance features are matched.

Q5: Can these substitutes be used interchangeably in qualified designs?
A5: Based on matching electrical, mechanical, and compliance parameters provided, the substitutes listed are suitable for direct replacement given product status and certifications.