V10P6HM3_A/I Equivalent & Substitute Parts

Part Overview

The V10P6HM3_A/I is a Schottky rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, designed for surface mount applications in automotive-grade circuits. This component operates at 60 V DC reverse voltage with a 10 A average rectified current rating and is housed in a TO-277A (SMPC) package. The part is currently active in production and maintains full compliance with automotive qualification standards including AEC-Q101. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to inventory constraints, supply chain considerations, or design flexibility within the same product family.

Substiute Parts

V10P6HM3_A/I

Vishay General Semiconductor - Diodes DivisionIn Stock: 909V10P6HM3_A/I Datasheet

Current PartRFQ

V10P6HM3_A/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 8810V10P6HM3_A/H Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V10P6HM3_A/I are identified based on strict electrical and mechanical parameter equivalence. The substitution logic is based on the following critical parameters:

Electrical Equivalence Criteria:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 590 mV @ 10 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)
• Current - Reverse Leakage @ Vr: 1.9 mA @ 60 V
• Operating Temperature - Junction: -40°C to 150°C

Mechanical Equivalence Criteria:

• Package / Case: TO-277, 3-PowerDFN
• Mounting Type: Surface Mount
• Supplier Device Package: TO-277A (SMPC)

Compliance Equivalence Criteria:

• Grade: Automotive
• Qualification: AEC-Q101
• Technology: Schottky
• Series: eSMP®, TMBS®
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both the V10P6HM3_A/I and V10P6HM3_A/H are active production parts manufactured by Vishay General Semiconductor - Diodes Division. They are electrically and mechanically identical across all specified parameters, including voltage ratings, current capacity, forward voltage characteristics, and recovery speed. Both components maintain automotive-grade qualification under AEC-Q101 and comply with ROHS3 and REACH requirements.

The V10P6HM3_A/H substitute part is suitable for direct replacement in any application currently specified for the V10P6HM3_A/I. The difference between these part numbers reflects internal Vishay manufacturing or packaging designations (tape reel configuration) and does not affect functional performance or circuit compatibility. Selection between these parts may be based on inventory availability, lead time, or supply chain logistics without requiring circuit redesign or re-qualification.

Frequently Asked Questions (FAQ)

Q: Can V10P6HM3_A/H be used as a direct replacement for V10P6HM3_A/I in production assemblies?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters. They share the same voltage rating (60 V), current capacity (10 A), forward voltage (590 mV @ 10 A), package type (TO-277A SMPC), and automotive qualification (AEC-Q101). No circuit modifications are required.

Q: Are there any differences in thermal performance between these parts?

A: No. Both parts operate across the same junction temperature range (-40°C to 150°C) and share identical reverse leakage characteristics (1.9 mA @ 60 V). Thermal performance is equivalent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both V10P6HM3_A/I and V10P6HM3_A/H are ROHS3 compliant, REACH unaffected, and hold AEC-Q101 automotive qualification. They are suitable for identical application environments.

Q: What does the difference in part number suffix indicate?

A: The suffix difference (A/I versus A/H) reflects internal Vishay manufacturing designations related to tape reel packaging configuration. This does not affect electrical performance, mechanical fit, or functional characteristics.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since both parts are parametrically equivalent and mechanically identical, they can be used interchangeably within the same assembly without affecting performance or reliability.

Q: Are there any package or pinout differences?

A: No. Both parts use the TO-277A (SMPC) surface mount package with identical pinout and mechanical dimensions. PCB footprints and assembly processes are identical.