V10E230PL4 Equivalent & Substitute Parts

Part Overview

The V10E230PL4 is a radial varistor manufactured by Littelfuse Inc. in the UltraMOV™ series, designed for transient voltage suppression applications. This through-hole disc varistor (10mm) provides protection at 360 V nominal varistor voltage with a surge current rating of 4.6 kA. The component is Active in product status and fully compliant with RoHS3 and REACH regulations. Substitute parts are identified when electrical parameters, mechanical form factor, and compliance certifications remain equivalent across the product line.

Substiute Parts

V10E230PL4

Littelfuse Inc.In Stock: 911V10E230PL4 Datasheet

Current PartRFQ

V10E230P

LittelfuseIn Stock: 2602V10E230P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the V10E230PL4 is determined by strict equivalence across the following critical parameters:

• Varistor voltage rating (typical value and tolerance range)
• Surge current capacity (4.6 kA)
• Energy absorption (42 J)
• Package form factor (Disc 10mm through-hole)
• Number of circuits (1)
• Operating temperature range (-55°C to 85°C)
• Compliance certifications (RoHS3, REACH)

The V10E230P meets all substitution criteria as a parametric equivalent within the UltraMOV™ series, maintaining identical electrical performance and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both V10E230PL4 and V10E230P are Active products within the UltraMOV™ series and maintain full compliance with RoHS3 and REACH regulations. Selection between these parts is based on availability and packaging designation. The V10E230P offers higher inventory availability (2565 pcs vs. 837 pcs) while maintaining identical electrical and mechanical specifications. Both components are suitable for direct substitution in 360 V transient voltage suppression applications requiring 4.6 kA surge capacity.

Frequently Asked Questions (FAQ)

Q: Can V10E230P replace V10E230PL4 in existing designs?

A: Yes. Both parts are parametric equivalents with identical varistor voltage (360 V typical), surge current rating (4.6 kA), energy absorption (42 J), and package form factor (Disc 10mm through-hole). Electrical performance and mechanical compatibility are equivalent.

Q: What determines substitution eligibility for these varistors?

A: Substitution is based on matching varistor voltage rating (including tolerance range), surge current capacity, energy rating, package dimensions, circuit count, operating temperature range, and compliance certifications. All these parameters are identical between V10E230PL4 and V10E230P.

Q: Are there differences in packaging between these parts?

A: Both parts use identical Disc 10mm through-hole packaging. The designation difference (PL4 vs. P) reflects internal Littelfuse product line categorization but does not affect mechanical or electrical compatibility.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both V10E230PL4 and V10E230P are RoHS3 Compliant and REACH Unaffected, with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the operating temperature range for these varistors?

A: Both parts operate across -55°C to 85°C ambient temperature range, suitable for industrial and commercial applications.