V10E150PL2B Equivalent & Substitute Parts

Part Overview

The V10E150PL2B is a 240 V, 4.6 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This through-hole disc component (10mm) is designed for transient voltage protection in single-circuit applications. The part maintains Active product status with full ROHS3 compliance and REACH unaffected certification. Substitute parts are identified when electrical parameters, mechanical specifications, and compliance certifications remain equivalent across the component lifecycle or inventory availability scenarios.

Substiute Parts

V10E150PL2B

Littelfuse Inc.In Stock: 1099V10E150PL2B Datasheet

Current PartRFQ

V10E150P

Littelfuse Inc.In Stock: 10465V10E150P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the V10E150PL2B is determined by strict equivalence across the following critical parameters:

• Maximum AC Volts: 150 V
• Maximum DC Volts: 200 V
• Varistor Voltage (Typical): 240 V
• Current - Surge: 4.6 kA
• Energy Rating: 30 J
• Number of Circuits: 1
• Mounting Type: Through Hole
• Package / Case: Disc 10mm
• Operating Temperature Range: -55°C to 85°C
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The V10E150P qualifies as a parametric equivalent substitute. Both parts are manufactured by Littelfuse Inc. within the UltraMOV™ series and share identical electrical ratings, mechanical specifications, and compliance certifications. The primary distinction is packaging designation (bulk for both) and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both the V10E150PL2B and V10E150P maintain Active product status and are fully compliant with ROHS3 and REACH requirements. Selection between these parts is based on availability and supply chain considerations rather than electrical or mechanical differentiation. The V10E150P offers higher inventory availability (10,438 pcs vs. 1,070 pcs), making it suitable for high-volume production scenarios. Both parts are suitable for direct substitution in applications requiring 240 V varistor protection with 4.6 kA surge current capacity and 30 J energy absorption in through-hole disc configurations.

Frequently Asked Questions (FAQ)

Q: Can V10E150P be used as a direct replacement for V10E150PL2B?

A: Yes. Both parts are electrically and mechanically equivalent with identical voltage ratings (240 V typical), surge current capacity (4.6 kA), energy rating (30 J), and through-hole disc 10mm packaging. Compliance certifications are identical.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters match: Maximum AC/DC voltage ratings, varistor voltage range (216-264 V), surge current (4.6 kA), energy rating (30 J), number of circuits (1), operating temperature range (-55°C to 85°C), mounting type (through hole), and package form factor (disc 10mm).

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical ROHS3 compliance, REACH unaffected status, EAR99 ECCN classification, and HTSUS code 8533.40.4000. Moisture sensitivity level is 1 (unlimited) for both.

Q: What is the primary difference between V10E150PL2B and V10E150P?

A: The parts are functionally identical. The primary distinction is inventory availability, with V10E150P offering significantly higher stock levels.

Q: Are these parts suitable for high-temperature applications?

A: Both parts operate within the -55°C to 85°C temperature range. Applications requiring operation outside this range require alternative component selection.