V07P320PL1T Equivalent & Substitute Parts

Part Overview

The V07P320PL1T is a 510 V, 1.75 kA disc varistor from Littelfuse Inc.'s UltraMOV™ series, designed for transient voltage suppression in through-hole applications. This component operates across a temperature range of -55°C to 85°C and is ROHS3 compliant. The part is currently active in production with 652 units in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility without redesign.

Substiute Parts

V07P320PL1T

Littelfuse Inc.In Stock: 717V07P320PL1T Datasheet

Current PartRFQ

V07E320PL2T

Littelfuse Inc.In Stock: 10851V07E320PL2T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V07E320PL2T qualifies as a parametric equivalent to the V07P320PL1T based on identical electrical specifications and mechanical form factor. Substitution is valid when the following criteria are met:

• Varistor voltage range: 459 V (Min) to 561 V (Max), with 510 V typical
• Surge current capacity: 1.75 kA
• Energy rating: 32 J
• Capacitance: 65 pF @ 1 MHz
• Operating temperature: -55°C to 85°C
• Mounting configuration: Through Hole, Disc 7mm package
• Compliance: ROHS3, REACH Unaffected

The only difference between these parts is packaging format: V07P320PL1T is supplied in Tape & Reel (TR), while V07E320PL2T is supplied in Cut Tape (CT). Both are manufactured by Littelfuse Inc. and belong to the UltraMOV™ series.

Parameter Comparison

Engineering Selection Recommendations

Both V07P320PL1T and V07E320PL2T are active production components with identical electrical performance and mechanical specifications. Selection between these parts should be based on procurement and assembly requirements:

• V07P320PL1T (Tape & Reel) is suitable for high-volume automated assembly operations requiring continuous reel feeding.
• V07E320PL2T (Cut Tape) is suitable for lower-volume applications, manual assembly, or when reel storage is not practical.

Both parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory compatibility across applications. No functional or performance differences exist between these variants.

Frequently Asked Questions (FAQ)

Q: Can V07E320PL2T replace V07P320PL1T in my circuit design?

A: Yes. Both parts have identical electrical specifications, voltage ratings, surge current capacity, and operating temperature ranges. The only difference is packaging format (Cut Tape vs. Tape & Reel). No circuit redesign is required.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly or lower-volume production. Both formats contain the same component.

Q: Are there any compliance or certification differences between these parts?

A: No. Both V07P320PL1T and V07E320PL2T carry identical ROHS3 compliance and REACH Unaffected status. They are both manufactured by Littelfuse Inc. and belong to the same UltraMOV™ series.

Q: Which part should I specify for new designs?

A: Selection depends on your assembly process. For automated high-volume production, specify V07P320PL1T (Tape & Reel). For manual assembly or lower volumes, V07E320PL2T (Cut Tape) may be more practical. Both are equally valid from an electrical and mechanical standpoint.

Q: Is there an inventory advantage to choosing one over the other?

A: V07E320PL2T has higher current inventory (10,803 units) compared to V07P320PL1T (652 units). If procurement lead time is a concern, V07E320PL2T may offer better availability.