Equivalent & Substitute Parts for V07E60PL2B

Part Overview

The V07E60PL2B is a 100 V, 1.75 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse in the LV UltraMOV™ series. This through-hole disc component is designed for transient voltage protection in electronic circuits. The part is currently Active in product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when electrical parameters, mechanical specifications, and compliance certifications remain equivalent across the product line.

Substiute Parts

V07E60PL2B

LittelfuseIn Stock: 1026V07E60PL2B Datasheet

Current PartRFQ

V07E60P

Littelfuse Inc.In Stock: 4914V07E60P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the V07E60PL2B are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

• Varistor voltage range: 90 V (Min) to 110 V (Max), with 100 V typical
• Surge current rating: 1.75 kA
• Energy dissipation: 12 J
• Mounting configuration: Through Hole
• Package form factor: Disc 7mm
• Operating temperature range: -40°C to 85°C
• Compliance status: RoHS3 Compliant, REACH Unaffected

Parts meeting all these parameters are classified as parametric equivalents and may be used interchangeably in circuit designs requiring 100 V transient voltage suppression.

Parameter Comparison

Engineering Selection Recommendations

Both V07E60PL2B and V07E60P are Active products from Littelfuse's LV UltraMOV™ series with identical electrical specifications and mechanical form factors. Selection between these parts may be based on packaging availability and inventory status. Both parts carry RoHS3 compliance and REACH unaffected designation, meeting regulatory requirements for industrial and commercial applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for storage and handling.

Frequently Asked Questions (FAQ)

Q: Can V07E60P be used as a direct replacement for V07E60PL2B?

A: Yes. Both parts are parametric equivalents with identical varistor voltage ratings (100 V typical), surge current capacity (1.75 kA), energy dissipation (12 J), and mechanical specifications (Through Hole, Disc 7mm package). They are interchangeable in circuit applications.

Q: What determines if a substitute part is acceptable?

A: Substitute parts must match the main part across all critical parameters: varistor voltage range (90–110 V), surge current (1.75 kA), energy rating (12 J), operating temperature range (-40°C to 85°C), and package form factor (Disc 7mm Through Hole). Compliance certifications (RoHS3, REACH) must also align.

Q: Are there any differences in compliance or certifications between these parts?

A: No. Both V07E60PL2B and V07E60P carry identical RoHS3 compliance, REACH unaffected status, and MSL rating of 1 (Unlimited). They meet the same regulatory and environmental standards.

Q: Does packaging type affect substitution eligibility?

A: Yes. Both parts use identical Through Hole mounting and Disc 7mm package form factors. Any substitute must maintain these mechanical specifications to ensure proper circuit board integration and thermal performance.

Q: What is the operating temperature range for these parts?

A: Both parts operate across -40°C to 85°C (TA). This range must be maintained in substitute selections to ensure reliable performance across the intended application environment.