V07E320PL3T Equivalent & Substitute Parts

Part Overview

The V07E320PL3T is a 510 V, 1.75 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This through-hole disc component (7mm) is designed for transient voltage protection in electronic circuits. The part is Active status and ROHS3 compliant. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications.

Substiute Parts

V07E320PL3T

Littelfuse Inc.In Stock: 850V07E320PL3T Datasheet

Current PartRFQ

V07E320PL2T

Littelfuse Inc.In Stock: 10851V07E320PL2T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V07E320PL2T qualifies as a parametric equivalent to the V07E320PL3T based on the following criteria:

Identical Electrical Parameters:

• Varistor Voltage (Min/Typ/Max): 459 V / 510 V / 561 V
• Current - Surge: 1.75 kA
• Maximum AC Volts: 320 V
• Maximum DC Volts: 420 V
• Energy: 32 J
• Capacitance @ 1 MHz: 65 pF
• Operating Temperature: -55°C to 85°C

Identical Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: Disc 7mm
• Number of Circuits: 1

Difference:

• Packaging format: V07E320PL3T supplied in Tape & Reel (TR); V07E320PL2T supplied in Cut Tape (CT)

Both parts are manufactured by Littelfuse Inc., belong to the UltraMOV™ series, maintain Active product status, and are ROHS3 compliant.

Parameter Comparison

Engineering Selection Recommendations

Both V07E320PL3T and V07E320PL2T are Active products from Littelfuse Inc. with identical electrical and mechanical specifications. Selection between these parts depends on packaging requirements:

• V07E320PL3T (Tape & Reel): Suitable for automated assembly processes requiring reel-based component feeding.
• V07E320PL2T (Cut Tape): Suitable for manual assembly, small-volume production, or applications where individual component access is required.

Both parts maintain ROHS3 compliance, REACH Unaffected status, and MSL Level 1 rating. No functional or performance differences exist between the two variants.

Frequently Asked Questions (FAQ)

Q: Can V07E320PL2T replace V07E320PL3T in my circuit?

A: Yes. Both parts have identical electrical parameters (510 V typical varistor voltage, 1.75 kA surge current, 32 J energy) and mechanical specifications (through-hole mounting, 7mm disc package). The only difference is packaging format (Cut Tape vs. Tape & Reel).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels for automated pick-and-place assembly. Cut Tape (CT) packaging supplies components on tape segments, typically for manual assembly or lower-volume applications. Both formats contain the same component.

Q: Are there any compliance differences between these parts?

A: No. Both V07E320PL3T and V07E320PL2T are ROHS3 compliant, REACH Unaffected, and carry MSL Level 1 rating.

Q: Which part should I select for high-volume production?

A: V07E320PL3T (Tape & Reel) is optimized for high-volume automated assembly. V07E320PL2T (Cut Tape) is suitable for lower volumes or manual assembly processes.

Q: Do these parts have the same operating temperature range?

A: Yes. Both parts operate across -55°C to 85°C ambient temperature range.