V07E175PL2T7 Equivalent & Substitute Parts

Part Overview

The V07E175PL2T7 is a 270 V, 1.75 kA Transient Voltage Suppressor (TVS) varistor manufactured by Littelfuse Inc. in the UltraMOV™ series. This through-hole disc varistor (7mm) is designed for transient overvoltage protection in electronic circuits. The part is currently Active in product status with full ROHS3 compliance and REACH unaffected designation. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility without circuit redesign.

Substiute Parts

V07E175PL2T7

Littelfuse Inc.In Stock: 805V07E175PL2T7 Datasheet

Current PartRFQ

V07E175PL2T5

Littelfuse Inc.In Stock: 2054V07E175PL2T5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The V07E175PL2T5 qualifies as a parametric equivalent to the V07E175PL2T7 based on the following substitution criteria:

Electrical Parameters (Identical):

• Varistor Voltage (Min/Typ/Max): 243 V / 270 V / 297 V
• Current - Surge: 1.75 kA
• Maximum AC Volts: 175 V
• Maximum DC Volts: 225 V
• Energy: 17 J
• Number of Circuits: 1
• Capacitance @ 1 MHz: 130 pF
• Operating Temperature Range: -55°C to 85°C

Mechanical Parameters (Identical):

• Mounting Type: Through Hole
• Package / Case: Disc 7mm

Difference:

• Packaging format: V07E175PL2T7 supplied in Tape & Reel (TR); V07E175PL2T5 supplied in Cut Tape (CT)

Both parts share identical electrical performance and physical form factor. The packaging difference reflects supply chain configuration only and does not affect circuit functionality or performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both V07E175PL2T7 and V07E175PL2T5 are Active products with identical electrical and mechanical specifications. Selection between these parts is determined by procurement and assembly requirements:

V07E175PL2T7 (Tape & Reel): Suitable for high-volume automated assembly operations requiring reel-fed component handling.

V07E175PL2T5 (Cut Tape): Suitable for lower-volume production, manual assembly, or mixed-component procurement scenarios.

Both parts maintain full ROHS3 compliance and REACH unaffected status. No functional or performance differences exist between the two variants. Component selection should be based on supply chain availability, inventory management strategy, and assembly process requirements.

Frequently Asked Questions (FAQ)

Q: Can V07E175PL2T5 be used as a direct replacement for V07E175PL2T7 in circuit design?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape vs. Tape & Reel). Circuit performance, electrical characteristics, and physical form factor are identical.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous reels suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, typically used for manual assembly or lower-volume production runs. Both formats contain the same component.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: ROHS3 Compliant, REACH Unaffected, Moisture Sensitivity Level 1 (Unlimited), and equivalent ECCN and HTSUS classifications.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on production volume, assembly method, and supply chain strategy. Both parts are Active products with equivalent long-term availability.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since electrical and mechanical specifications are identical, both packaging formats can be used interchangeably in the same circuit design and production environment.