Littelfuse V07E130 Equivalent & Substitute Parts

Part Overview

The Littelfuse V07E130 is a 205 V, 1.75 kA disc varistor from the UltraMOV™ series, designed for transient voltage suppression in through-hole applications. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations. The varistor provides protection against voltage transients with a nominal varistor voltage of 205 V and energy absorption capacity of 12.5 J.

Substiute Parts

V07E130

Littelfuse Inc.In Stock: 1061V07E130 Datasheet

Current PartRFQ

V07E130P

Littelfuse Inc.In Stock: 3063V07E130P Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the V07E130 is determined by exact equivalence across all critical electrical and mechanical parameters. The substitute part must maintain identical specifications for varistor voltage range (184.5 V minimum to 225.5 V maximum), surge current rating (1.75 kA), energy absorption (12.5 J), package geometry (Disc 7mm), and mounting configuration (Through Hole). Packaging format differences (tape and reel versus bulk) do not affect functional compatibility and are permitted variations.

Parameter Comparison

Engineering Selection Recommendations

The V07E130P is a direct functional equivalent to the obsolete V07E130. Both components are manufactured by Littelfuse Inc. within the UltraMOV™ series and share identical electrical specifications and mechanical form factors. The primary distinction is product status: the V07E130 is obsolete while the V07E130P maintains active production status. For applications currently using the V07E130, transition to the V07E130P is supported by complete parameter equivalence. Both parts maintain ROHS3 compliance and identical moisture sensitivity ratings. The V07E130P is available in bulk packaging, whereas the original part number may have been supplied in alternative packaging configurations.

Frequently Asked Questions (FAQ)

Q: Can the V07E130P directly replace the V07E130 in existing designs? A: Yes. The V07E130P is electrically and mechanically identical to the V07E130 across all specified parameters, including varistor voltage, surge current rating, energy absorption, package geometry, and operating temperature range.

Q: What is the difference between V07E130 and V07E130P? A: The components are functionally equivalent. The V07E130 is classified as obsolete, while the V07E130P is in active production. The V07E130P is supplied in bulk packaging format. All electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences? A: Both parts maintain identical RoHS3 compliance status and moisture sensitivity level (MSL 1 - Unlimited). No compliance differences exist between the two part numbers.

Q: Does packaging format affect circuit performance? A: No. Packaging format (bulk versus tape and reel) does not affect electrical performance or functional compatibility. The component itself remains unchanged.

Q: What parameters must match for substitution eligibility? A: Substitution requires exact equivalence in varistor voltage range (184.5 V to 225.5 V), surge current (1.75 kA), energy absorption (12.5 J), package type (Disc 7mm), and mounting configuration (Through Hole).