UX72F62024 Equivalent & Substitute Parts

Part Overview

The UX72F62024 is a 156.253906 MHz XO (Standard) LVPECL oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ UX series. This component operates at 3.3V supply voltage and is designed for applications requiring precision frequency generation with LVPECL output signaling. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

UX72F62024

Diodes IncorporatedIn Stock: 1131UX72F62024 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute oscillators for the UX72F62024 must satisfy the following critical parameters to ensure functional equivalence:

Mandatory Matching Parameters:

• Frequency: 156.253906 MHz (exact match required)
• Output Type: LVPECL
• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to 85°C minimum
• Package Dimensions: 7.00mm x 5.00mm or compatible footprint
• Base Resonator Type: Crystal (XO Standard)

Compliance Requirements:

• RoHS Compliant status
• Moisture Sensitivity Level: MSL 1 or better

No manufacturer-recommended substitute parts have been provided for this component. Substitution evaluation requires direct comparison against these specified parameters with alternative oscillator products from qualified manufacturers.

Parameter Comparison

Engineering Selection Recommendations

When selecting a substitute for the UX72F62024, prioritize components that maintain exact frequency specification and LVPECL output compatibility. The obsolete status of the original part necessitates sourcing from active product lines; verify that candidate parts carry current RoHS Compliant certification and maintain MSL 1 or better moisture sensitivity ratings for equivalent reliability in storage and handling.

Footprint compatibility with the 7.00mm x 5.00mm package is critical for direct board-level substitution without layout modifications. Confirm that alternative oscillators support the full -40°C to 85°C operating temperature range to ensure performance consistency across specified environmental conditions.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the UX72F62024? A: A substitute must match the exact frequency of 156.253906 MHz, provide LVPECL output, operate at 3.3V supply voltage, support -40°C to 85°C temperature range, and fit the 7.00mm x 5.00mm package footprint. RoHS Compliance and MSL 1 rating are required.

Q: Can I use a different frequency oscillator? A: No. The 156.253906 MHz frequency is application-specific and cannot be substituted with alternative frequencies without system redesign and validation.

Q: Are there package alternatives? A: The 7.00mm x 5.00mm package is the specified form factor. Substitutes must use this identical package or a footprint-compatible alternative to avoid PCB layout changes.

Q: What if I cannot find an exact match? A: Verify that candidate parts meet all mandatory parameters listed in the Substitute Part Grouping Explanation section. Consult component datasheets to confirm electrical and mechanical compatibility before procurement.

Q: Does RoHS Compliance status affect substitution? A: Yes. Both the original part and any substitute must carry RoHS Compliant certification to maintain regulatory compliance in target applications and markets.