Equivalent & Substitute Parts for UVZ2D100MPH

Part Overview

The UVZ2D100MPH is a 10 µF, 200 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is classified as obsolete, indicating it is no longer in active production. Finding equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing maintenance and repair operations for legacy systems utilizing this capacitor.

Substiute Parts

UVZ2D100MPH

NichiconIn Stock: 923UVZ2D100MPH Datasheet

Current PartRFQ

UVZ2D100MPD

NichiconIn Stock: 8681UVZ2D100MPD Datasheet

DirectRFQ

SEK100M200ST

Cornell Dubilier Electronics (CDE)In Stock: 1009SEK100M200ST Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the UVZ2D100MPH are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Capacitance: 10 µF (exact match required)
• Voltage Rating: 200 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime @ Temperature: 2000 Hrs @ 105°C (exact match required)
• Operating Temperature Range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)

Mechanical Compatibility Criteria:

• Package Type: Radial, Can (exact match required)
• Mounting Type: Through Hole (exact match required)
• Lead Spacing: 0.197" (5.00mm) (exact match required)
• Size / Dimension: 0.394" Dia (10.00mm) (exact match required)
• Height - Seated (Max): tolerance within ±0.020" (0.50mm) acceptable for PCB clearance

Substitute parts meeting all electrical and mechanical criteria are classified as direct equivalents. Parts with minor dimensional variations within standard manufacturing tolerances remain mechanically compatible with the original design.

Parameter Comparison

Engineering Selection Recommendations

UVZ2D100MPD (Direct Manufacturer Equivalent): This Nichicon part is the direct equivalent within the same UVZ series. It maintains identical electrical and mechanical specifications to the UVZ2D100MPH. The UVZ2D100MPD carries ROHS3 compliance status, providing improved environmental compliance compared to the original part. This substitute is suitable for direct replacement in existing designs and repair applications.

SEK100M200ST (Cross-Manufacturer Equivalent): This Cornell Dubilier Electronics part meets all electrical specifications and maintains mechanical compatibility with a height variation of 0.020" (0.50mm), which remains within acceptable PCB clearance tolerances. The SEK100M200ST is classified as active product status, ensuring ongoing availability. This part includes specified ESR of 19.9 Ohm and carries ROHS3 compliance. The SEK100M200ST is suitable for applications where cross-manufacturer sourcing is acceptable and long-term supply continuity is prioritized.

Selection between UVZ2D100MPD and SEK100M200ST depends on design requirements for manufacturer consistency, supply chain preferences, and compliance certifications. Both parts satisfy the electrical and mechanical requirements for direct substitution.

Frequently Asked Questions (FAQ)

Q: Can UVZ2D100MPD be used as a direct replacement for UVZ2D100MPH?

A: Yes. The UVZ2D100MPD is a direct equivalent. Both parts share identical capacitance (10 µF), voltage rating (200 V), tolerance (±20%), lifetime rating (2000 Hrs @ 105°C), operating temperature range (-40°C ~ 105°C), and mechanical dimensions. The UVZ2D100MPD is suitable for direct PCB substitution without design modification.

Q: What is the height difference between UVZ2D100MPH and SEK100M200ST?

A: The UVZ2D100MPH has a maximum seated height of 0.492" (12.50mm), while the SEK100M200ST has a maximum seated height of 0.512" (13.00mm). The difference of 0.020" (0.50mm) is within standard manufacturing tolerances and does not affect PCB clearance in typical through-hole designs. Verify clearance in your specific PCB layout if space constraints exist.

Q: Are there RoHS compliance differences between these substitutes?

A: Yes. The UVZ2D100MPH is RoHS non-compliant. Both substitute parts, UVZ2D100MPD and SEK100M200ST, are ROHS3 compliant. If your application requires RoHS compliance certification, either substitute part satisfies this requirement.

Q: What does "Not For New Designs" mean for the UVZ2D100MPD?

A: This product status indicates that while the part remains available, the manufacturer does not recommend it for new design implementations. The UVZ2D100MPD is suitable for repair, maintenance, and legacy system support. For new designs, the SEK100M200ST (Active status) may be preferred for long-term supply assurance.

Q: Can I use SEK100M200ST in a design originally specified for UVZ2D100MPH?

A: Yes. The SEK100M200ST meets all electrical specifications and maintains mechanical compatibility. The 0.020" height difference is acceptable for standard through-hole applications. Verify PCB layout clearance if space is constrained. Cross-manufacturer substitution is electrically and mechanically valid.

Q: What parameters must match exactly for substitution?

A: Capacitance (10 µF), voltage rating (200 V), tolerance (±20%), lifetime rating (2000 Hrs @ 105°C), operating temperature range (-40°C ~ 105°C), polarization (Polar), package type (Radial, Can), mounting type (Through Hole), and lead spacing (0.197" / 5.00mm) must match exactly. Height variation within ±0.020" (0.50mm) is acceptable for mechanical compatibility.