UVP0J331MPD1TA Equivalent & Substitute Parts

Part Overview

The UVP0J331MPD1TA is a 330 µF, 6.3 V aluminum electrolytic capacitor in radial configuration manufactured by Nichicon. This component is rated for 2000 hours at 85°C and is designed for general-purpose applications requiring through-hole mounting. The part carries a "Not For New Designs" product status, indicating that alternative components should be evaluated for new circuit implementations. Identifying equivalent and substitute parts is essential for maintaining design flexibility, ensuring supply chain continuity, and supporting legacy system maintenance.

Substiute Parts

UVP0J331MPD1TA

NichiconIn Stock: 1060UVP0J331MPD1TA Datasheet

Current PartRFQ

UVP0J331MPD1TD

NichiconIn Stock: 3872UVP0J331MPD1TD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UVP0J331MPD1TA is determined by strict equivalence across the following critical parameters:

• Capacitance value: 330 µF (exact match required)
• Rated voltage: 6.3 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Bi-Polar (exact match required)
• Lifetime rating: 2000 Hrs @ 85°C (exact match required)
• Operating temperature range: -40°C ~ 85°C (exact match required)
• Ripple current specifications: 265 mA @ 120 Hz and 397.5 mA @ 10 kHz (exact match required)
• Physical dimensions and lead spacing: 0.315" Dia (8.00 mm), 0.512" Height, 0.138" Lead Spacing (exact match required)
• Mounting type: Through Hole, Radial Can package (exact match required)
• Compliance: ROHS3 Compliant, REACH Affected (exact match required)

The substitute part UVP0J331MPD1TD meets all these criteria and is therefore a direct parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the UVP0J331MPD1TA and UVP0J331MPD1TD are marked as "Not For New Designs," indicating that these components are in mature or obsolescence phases. For new circuit designs, evaluation of alternative capacitor solutions from current product lines is recommended. However, for legacy system support, repair, and maintenance applications, the UVP0J331MPD1TD provides direct parametric equivalence to the UVP0J331MPD1TA. Both parts maintain identical electrical performance, physical form factor, and regulatory compliance (ROHS3 Compliant, REACH Affected). Selection between these two parts should be based on availability and supply chain considerations rather than technical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the UVP0J331MPD1TD be used as a direct replacement for the UVP0J331MPD1TA?

A: Yes. The UVP0J331MPD1TD is a direct parametric equivalent. All electrical specifications, physical dimensions, lead spacing, and compliance certifications are identical. No circuit modifications or PCB layout changes are required.

Q: Are there any differences in the mechanical footprint between these parts?

A: No. Both parts share identical dimensions: 0.315" diameter (8.00 mm), 0.512" maximum seated height (13.00 mm), and 0.138" lead spacing (4.60 mm). PCB hole patterns and mounting requirements are identical.

Q: What is the significance of the "Not For New Designs" status?

A: This designation indicates that the manufacturer is not recommending these parts for new circuit implementations. For legacy system maintenance and repair, these parts remain suitable. For new designs, alternative capacitor solutions should be evaluated.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the UVP0J331MPD1TA and UVP0J331MPD1TD are ROHS3 Compliant and REACH Affected, meeting identical environmental and regulatory standards.

Q: Is there a difference in ripple current handling between these parts?

A: No. Both parts are rated for identical ripple current specifications: 265 mA at 120 Hz and 397.5 mA at 10 kHz.