Equivalent & Substitute Parts for UTT1V100MDD1TP

Part Overview

The UTT1V100MDD1TP is a 10 µF, 35 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 5000 hours at 105°C and is designed for general purpose applications. The part is currently obsolete, making identification of suitable substitute components necessary for ongoing system support and new design implementations.

Substiute Parts

UTT1V100MDD1TP

NichiconIn Stock: 850UTT1V100MDD1TP Datasheet

Current PartRFQ

UTS1V100MDD1TP

NichiconIn Stock: 1036UTS1V100MDD1TP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UTT1V100MDD1TP is determined by strict equivalence across the following parameters:

• Capacitance value: 10 µF (exact match required)
• Rated voltage: 35 V (exact match required)
• Tolerance: ±20% (exact match required)
• Package type: Radial, Can (exact match required)
• Lead spacing: 0.098" (2.50mm) (exact match required)
• Physical dimensions: 0.197" Dia × 0.315" Height (exact match required)
• Mounting type: Through Hole (exact match required)
• Operating temperature range: -40°C ~ 105°C (exact match required)
• Lifetime rating: 5000 Hrs @ 105°C (exact match required)

The UTS1V100MDD1TP meets all substitution criteria and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

The UTS1V100MDD1TP is a direct parametric equivalent to the UTT1V100MDD1TP. Both components share identical electrical specifications, physical dimensions, and compliance certifications. The substitute part is currently in active production status, whereas the original part is obsolete. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for new designs and legacy system support.

The UTS1V100MDD1TP is suitable for direct replacement in applications where the UTT1V100MDD1TP was originally specified.

Frequently Asked Questions (FAQ)

Q: Can the UTS1V100MDD1TP be used as a direct replacement for the UTT1V100MDD1TP?

A: Yes. Both parts are manufactured by Nichicon and share identical capacitance (10 µF), voltage rating (35 V), tolerance (±20%), physical dimensions, lead spacing, and operating temperature range. The substitute part meets all parametric requirements for direct substitution.

Q: What is the difference between the UTT and UTS series?

A: The UTT series is obsolete, while the UTS series is currently in active production. Both series share the same electrical and mechanical specifications for this particular part number variant.

Q: Are there any compliance differences between these parts?

A: No. Both the UTT1V100MDD1TP and UTS1V100MDD1TP maintain identical RoHS3 compliance, REACH unaffected status, and ECCN/HTSUS classifications.

Q: Will the UTS1V100MDD1TP fit in the same PCB footprint as the UTT1V100MDD1TP?

A: Yes. Both parts have identical lead spacing (0.098" / 2.50mm), diameter (0.197" / 5.00mm), and maximum seated height (0.315" / 8.00mm), ensuring mechanical compatibility in through-hole mounting applications.

Q: Are there any electrical performance differences I should consider?

A: The ripple current ratings differ between the two parts. The UTT1V100MDD1TP is rated for 29.6 mA @ 120 Hz and 74 mA @ 100 kHz, while the UTS1V100MDD1TP is rated for 21.5 mA @ 120 Hz and 43 mA @ 100 kHz. Applications requiring the higher ripple current specifications of the original part should be evaluated accordingly.