UTS71823P Equivalent & Substitute Parts Reference

Part Overview

The UTS71823P is a 23-position circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton, designed for panel mount applications with bayonet lock fastening. This component functions as a receptacle housing for male pins in the Trim Trio® UTS series and is classified as Active product status with 889 units currently in stock.

Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or when design specifications permit cross-platform compatibility within the same electrical and mechanical parameter envelope.

Substiute Parts

UTS71823P

Souriau-Sunbank by EatonIn Stock: 911UTS71823P Datasheet

Current PartRFQ

RTS718N23P03

Amphenol Sine Systems CorpIn Stock: 892RTS718N23P03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UTS71823P is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector type: Receptacle housing for male pins
• Position count: 23 positions
• Shell size insert range: 18-23
• Contact type: Crimp
• Contact size: 16
• Mounting configuration: Panel mount with bulkhead front side nut
• Fastening mechanism: Bayonet lock
• Ingress protection rating: IP67/IP69K
• Shell material: Thermoplastic
• Housing color: Black
• Shielding configuration: Unshielded
• Regulatory compliance: ROHS3 compliant

The substitute part RTS718N23P03 from Amphenol Sine Systems Corp meets all mandatory matching parameters, qualifying it as a direct equivalent within the circular connector receptacle housing category.

Parameter Comparison

Engineering Selection Recommendations

Both the UTS71823P and RTS718N23P03 are Active status products with full ROHS3 compliance and REACH unaffected designation, meeting current regulatory requirements for industrial circular connector applications.

The UTS71823P operates within a -40°C to 105°C temperature range, while the RTS718N23P03 extends to -40°C to 125°C. Selection between these parts should be based on the specific thermal environment of the application. Applications requiring operation above 105°C necessitate the RTS718N23P03.

The RTS718N23P03 includes integrated components (gasket, nut, O-ring) in its package, whereas the UTS71823P is supplied without contacts or additional components. This packaging difference affects assembly procedures and total cost of ownership.

Both parts share identical electrical and mechanical interface specifications: 23-position configuration, shell size 18-23, crimp contact type with size 16, panel mount bulkhead installation, bayonet lock fastening, and IP67/IP69K ingress protection rating.

Frequently Asked Questions (FAQ)

Q: Can RTS718N23P03 directly replace UTS71823P in existing designs?

A: Yes, within the specified operating temperature range. The RTS718N23P03 is electrically and mechanically equivalent for all interface parameters. The extended temperature rating of RTS718N23P03 (-40°C to 125°C versus -40°C to 105°C) provides additional thermal margin. Verify that the application does not exceed 105°C if UTS71823P is the original specification.

Q: What is the difference in packaging between these two parts?

A: The UTS71823P is supplied as a connector housing only (contacts not included). The RTS718N23P03 includes four additional components: one connector, one gasket, one nut, and one O-ring. Confirm whether your assembly process requires these integrated components or if separate procurement is preferred.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both UTS71823P and RTS718N23P03 are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance restrictions for industrial applications.

Q: What are the critical parameters that must match for substitution?

A: Substitution requires equivalence in: connector type (receptacle housing), position count (23), shell size (18-23), contact type (crimp), contact size (16), mounting type (panel mount bulkhead), fastening type (bayonet lock), ingress protection (IP67/IP69K), shell material (thermoplastic), housing color (black), and shielding configuration (unshielded).

Q: Can these connectors be used interchangeably with different fastening types?

A: No. Both parts are specified for bayonet lock fastening only. Connectors with different fastening mechanisms (threaded, push-pull, etc.) are not substitutable.

Q: What is the significance of the shell size 18-23 specification?

A: Shell size 18-23 defines the physical envelope and contact arrangement of the connector insert. This parameter must match exactly for mechanical and electrical compatibility with mating connectors and pin configurations.