UTS7147P Equivalent & Substitute Parts Reference

Part Overview

The UTS7147P is a 7-position (6 + PE) circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton. This panel mount connector is designed for male pin applications and features bayonet lock fastening with IP67/IP69K ingress protection. The part is currently active in production with 1,101 pieces in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component substitution within specified electrical and mechanical parameters.

Substiute Parts

UTS7147P

Souriau-Sunbank by EatonIn Stock: 1121UTS7147P Datasheet

Current PartRFQ

RTS714N7P03

Amphenol Sine Systems CorpIn Stock: 836RTS714N7P03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UTS7147P with the RTS714N7P03 is based on strict equivalence of the following critical parameters:

Electrical and Mechanical Compatibility Parameters:

• Connector type: Receptacle housing for male pins
• Position count: 7 (6 + PE)
• Shell size and insert designation: 14-7
• Contact type and size: Crimp, size 16
• Mounting configuration: Panel mount with bulkhead front side nut
• Fastening mechanism: Bayonet lock
• Orientation: Normal (N)
• Ingress protection rating: IP67/IP69K
• Shell material: Thermoplastic
• Housing color: Black
• Shielding configuration: Unshielded
• Regulatory compliance: ROHS3 compliant, REACH unaffected

Both parts share identical mechanical interfaces and electrical specifications within the defined parameter set, enabling direct substitution in applications where these specifications are required.

Parameter Comparison

Engineering Selection Recommendations

Both the UTS7147P and RTS714N7P03 are active production parts with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on availability and supply chain requirements.

The RTS714N7P03 includes integrated accessories (connector, gasket, nut, and O-ring) in its standard package, whereas the UTS7147P is supplied as a housing without contacts. This packaging difference may influence procurement decisions based on assembly requirements.

The RTS714N7P03 supports an extended operating temperature range of -40°C to 125°C compared to the UTS7147P range of -40°C to 105°C. Applications requiring operation above 105°C should specify the RTS714N7P03.

Both parts carry identical electrical classification codes (ECCN: EAR99, HTSUS: 8538.90.6000) and meet the same ingress protection and flammability standards.

Frequently Asked Questions (FAQ)

Q: Can the RTS714N7P03 directly replace the UTS7147P in existing designs?

A: Yes, within the specified operating temperature range of -40°C to 105°C. Both parts share identical mechanical interfaces, electrical specifications, shell sizes, contact configurations, and mounting features. The RTS714N7P03 supports extended temperature operation to 125°C, making it suitable for higher temperature applications.

Q: What is the difference in packaging between these two parts?

A: The UTS7147P is supplied as a receptacle housing without contacts. The RTS714N7P03 includes four integrated components: the connector housing, gasket, nut, and O-ring. Verify assembly requirements before selecting based on packaging configuration.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the UTS7147P and RTS714N7P03 are ROHS3 compliant and REACH unaffected. Both carry UL94 V-0 material flammability ratings and identical export classification codes.

Q: What are the critical parameters that define substitution eligibility?

A: Substitution is valid when the following parameters match: 7-position (6 + PE) configuration, 14-7 shell size, crimp contact type with size 16, panel mount with bulkhead front side nut, bayonet lock fastening, IP67/IP69K ingress protection, thermoplastic black housing, and unshielded design.

Q: Does the operating temperature difference affect substitution decisions?

A: The RTS714N7P03 supports operation to 125°C versus 105°C for the UTS7147P. If your application operates within -40°C to 105°C, both parts are equivalent. For temperatures between 105°C and 125°C, the RTS714N7P03 is required.

Q: Are there any contact or insert material differences?

A: The RTS714N7P03 specifies thermoplastic insert material. The UTS7147P insert material is not specified in the provided parameters. Verify insert material compatibility with your application requirements before substitution.