UTS6JC8E3P Equivalent & Substitute Parts

Part Overview

The UTS6JC8E3P is a 3-position circular connector plug manufactured by Souriau-Sunbank by Eaton, part of the Trim Trio® UTS Hi Seal series. This male pin connector features solder cup termination, bayonet lock fastening, and is rated for 7A at 250V with IP68/IP69K ingress protection. The connector is designed for free-hanging (in-line) applications in energy, instrumentation, lighting, and telecommunications sectors. As an active product with ROHS3 compliance and UL94 V-0 flammability rating, substitute parts are identified to provide alternative sourcing options when inventory or application requirements necessitate component alternatives.

Substiute Parts

UTS6JC8E3P

Souriau-Sunbank by EatonIn Stock: 761UTS6JC8E3P Datasheet

Current PartRFQ

RTS6BS8N3P

Amphenol Sine Systems CorpIn Stock: 1162RTS6BS8N3P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UTS6JC8E3P is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 3
• Shell Size - Insert: 8-3
• Fastening Type: Bayonet Lock
• Mounting Type: Free Hanging (In-Line)
• Ingress Protection: IP68/IP69K or equivalent
• Current Rating: 7A minimum
• Voltage Rating: 250V minimum
• Operating Temperature Range: Must encompass -40°C to 105°C
• Flammability Rating: UL94 V-0
• RoHS Compliance: ROHS3 Compliant

The substitute part RTS6BS8N3P from Amphenol Sine Systems Corp meets these core requirements. However, this substitute is a plug housing for male pins with crimp contact termination, whereas the main part features solder cup termination. This represents a functional difference in how the connector is terminated to the cable or circuit board. The substitute requires separate contact procurement and assembly, whereas the main part includes integrated solder cups for direct soldering.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (UTS6JC8E3P): Select this part when solder cup termination is required for direct soldering to PCBs or cable assemblies. This configuration eliminates the need for separate contact procurement and reduces assembly steps. The part is active, ROHS3 compliant, and maintains UL94 V-0 flammability certification.

Substitute Part (RTS6BS8N3P): Select this part when crimp termination is preferred or when the application requires modular contact assembly. This substitute provides a wider operating temperature range (-40°C to 125°C versus -40°C to 105°C) and maintains equivalent ingress protection at IP67/IP69K. Both parts are active products with ROHS3 compliance and UL94 V-0 certification.

Critical Consideration: The termination method differs between the main part and substitute. The main part uses solder cups; the substitute uses crimp contacts (Contact Size 20). This difference requires different assembly processes and tooling. Selection between these parts depends on the termination method specified in the application design.

Frequently Asked Questions (FAQ)

Q: Can RTS6BS8N3P directly replace UTS6JC8E3P in an existing assembly?

A: Direct mechanical and electrical replacement is possible due to matching shell size (8-3), position count (3), fastening type (bayonet lock), and mounting configuration (free-hanging in-line). However, the termination method differs: UTS6JC8E3P uses solder cups while RTS6BS8N3P requires crimp contacts. The assembly process and tooling requirements are different.

Q: What is the difference in ingress protection between these parts?

A: UTS6JC8E3P is rated IP68/IP69K. RTS6BS8N3P is rated IP67/IP69K. Both ratings provide dust-tight and waterproof protection. IP68 indicates complete immersion protection; IP67 indicates temporary immersion protection. For applications requiring full immersion capability, UTS6JC8E3P is the specified choice.

Q: Are both parts RoHS compliant?

A: Yes. Both UTS6JC8E3P and RTS6BS8N3P are ROHS3 compliant and carry UL94 V-0 flammability certification, meeting regulatory requirements for energy, instrumentation, lighting, and telecommunications applications.

Q: What is the contact finish specification for RTS6BS8N3P?

A: The contact finish for RTS6BS8N3P is not specified in the provided data. UTS6JC8E3P specifies gold mating contact finish at 16.0µin (0.41µm) thickness. Contact finish specifications for the substitute should be confirmed through the manufacturer's detailed technical documentation.

Q: Can I use different contact sizes with RTS6BS8N3P?

A: RTS6BS8N3P is specified with Contact Size 20 for crimp termination. Contact compatibility is determined by the connector housing design and must match the specified contact size. Alternative contact sizes are not interchangeable without affecting electrical and mechanical performance.

Q: What is the current and voltage rating for RTS6BS8N3P?

A: Current and voltage ratings for RTS6BS8N3P are not specified in the provided data. UTS6JC8E3P is rated for 7A at 250V. Electrical rating confirmation for the substitute should be obtained from the manufacturer's technical specifications before final selection.