UTS1JC1832P Equivalent & Substitute Parts Reference

Part Overview

The UTS1JC1832P is a 32-position circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton. This free-hanging (in-line) connector features a bayonet lock fastening mechanism and is designed for male pin integration. The component is classified as Active product status and is ROHS3 compliant with IP68/IP69K ingress protection rating. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the primary part is unavailable or when design specifications permit alternative qualified components within the same functional category.

Substiute Parts

UTS1JC1832P

Souriau-Sunbank by EatonIn Stock: 1139UTS1JC1832P Datasheet

Current PartRFQ

RTS1BS18N32P03

Amphenol Sine Systems CorpIn Stock: 1321RTS1BS18N32P03 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UTS1JC1832P is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Receptacle Housing for Male Pins
• Number of Positions: 32
• Shell Size - Insert: 18-32
• Contact Type: Crimp
• Contact Size: 20
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Orientation: N (Normal)
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Shell Material: Polyamide (PA), Nylon or Thermoplastic
• Ingress Protection: IP67/IP69K or IP68/IP69K
• Operating Temperature Range: Extended upper limit acceptable (105°C minimum required)
• Insert Material: Polyamide (PA), Nylon or Thermoplastic

The substitute part RTS1BS18N32P03 meets all mandatory matching parameters and operates within allowable variations for shell material, ingress protection, and operating temperature range.

Parameter Comparison

Engineering Selection Recommendations

Both the UTS1JC1832P and RTS1BS18N32P03 are Active product status components with ROHS3 compliance and identical moisture sensitivity ratings. Selection between these parts is based on the following engineering criteria:

UTS1JC1832P Selection Criteria:

• Applications requiring IP68/IP69K ingress protection specification
• Polyamide (PA) nylon material preference for shell and insert
• Operating temperature range up to 105°C
• Trim Trio® series integration requirements

RTS1BS18N32P03 Selection Criteria:

• Applications where IP67/IP69K ingress protection is acceptable
• Thermoplastic material preference for shell and insert
• Extended operating temperature capability up to 125°C
• ecomate® Aquarius™ series integration requirements
• Applications where included accessories (clamp ring, nut, O-ring, seal) provide value

Both components satisfy UL94 V-0 flammability requirements and REACH compliance. The RTS1BS18N32P03 provides extended temperature range capability and includes six accessory components, while the UTS1JC1832P maintains higher ingress protection rating at the lower temperature specification.

Frequently Asked Questions (FAQ)

Q: Can RTS1BS18N32P03 replace UTS1JC1832P in all applications?

A: RTS1BS18N32P03 is a functional equivalent for applications where IP67/IP69K ingress protection is acceptable. If the application specifically requires IP68/IP69K rating, the UTS1JC1832P must be used. Both components share identical electrical and mechanical specifications for connector type, position count, contact configuration, and fastening mechanism.

Q: What is the difference in ingress protection between IP67 and IP68?

A: IP67 provides dust-tight protection and temporary immersion in water up to 1 meter for 30 minutes. IP68 provides dust-tight protection and continuous immersion in water beyond 1 meter depth. The UTS1JC1832P specifies IP68/IP69K, while the RTS1BS18N32P03 specifies IP67/IP69K. Application requirements determine which rating is necessary.

Q: Are the shell materials interchangeable?

A: Both Polyamide (PA) nylon and Thermoplastic materials meet UL94 V-0 flammability requirements and are allowable variations for this connector category. Material selection depends on application-specific environmental and mechanical requirements. Both materials maintain equivalent electrical performance and moisture sensitivity characteristics.

Q: Does the operating temperature difference affect substitution?

A: The RTS1BS18N32P03 operates to 125°C versus 105°C for the UTS1JC1832P. This represents an allowable variation where the substitute part provides extended capability. If the application operates only within the -40°C to 105°C range, both parts are functionally equivalent. Applications requiring operation above 105°C require the RTS1BS18N32P03.

Q: What accessories are included with each part?

A: The UTS1JC1832P is supplied as a connector housing without included accessories. The RTS1BS18N32P03 includes six components: connector, backshell, clamp ring, nut, O-ring, and seal. Verify that included accessories in the RTS1BS18N32P03 are compatible with your assembly process and application requirements.

Q: Are both parts ROHS3 compliant?

A: Yes, both UTS1JC1832P and RTS1BS18N32P03 are ROHS3 compliant with MSL rating of 1 (Unlimited). Both components are REACH unaffected and classified under ECCN EAR99 with HTSUS code 8538.90.6000.

Q: Can contacts be used interchangeably between these housings?

A: Both housings accept crimp contacts with size 20 specification. Contact compatibility depends on the specific contact part number and manufacturer. Verify contact part numbers are qualified for both housing types before substitution.