UT0W7106SH Equivalent & Substitute Parts

Part Overview

The UT0W7106SH is a 6-position circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton, designed for panel mount applications with bayonet lock fastening. This component is classified as a Trim Trio® UTOW series connector and is currently in active product status with 920 units available in inventory. The receptacle housing accommodates female sockets with crimp contact configuration and provides IP67/IP69K ingress protection suitable for demanding industrial environments. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to supply constraints, inventory availability, or design standardization across manufacturing platforms.

Substiute Parts

UT0W7106SH

Souriau-Sunbank by EatonIn Stock: 984UT0W7106SH Datasheet

Current PartRFQ

RT0W7106SNH

Amphenol Sine Systems CorpIn Stock: 843RT0W7106SNH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the UT0W7106SH is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• Number of positions: 6
• Contact type: Crimp
• Contact size: 20
• Shielding configuration: Shielded

Mechanical Compatibility Parameters:

• Shell size - insert: 10-6
• Mounting type: Panel mount
• Mounting feature: Bulkhead - front side nut
• Fastening type: Bayonet lock
• Connector type: Receptacle housing for female sockets

Environmental & Compliance Parameters:

• Operating temperature range: -40°C ~ 105°C
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 compliant
• Shell material: Zinc alloy with nickel finish

The substitute part RT0W7106SNH meets all mandatory electrical and mechanical parameters. Ingress protection differs between the main part (IP67/IP69K) and substitute (IP67), representing a functional constraint that must be evaluated within specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the UT0W7106SH and RT0W7106SNH are active products with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these components is based on the following criteria:

UT0W7106SH Selection Criteria:

• Applications requiring IP67/IP69K ingress protection for high-pressure wash or submersion environments
• Trim Trio® UTOW series standardization within existing designs
• Current inventory availability of 920 units supports immediate procurement

RT0W7106SNH Selection Criteria:

• Applications where IP67 ingress protection meets environmental specifications
• ecomate® RM series integration within alternative platform designs
• Amphenol Sine Systems supply chain preference or existing vendor relationships

Both components satisfy identical electrical and mechanical interface requirements. The primary differentiation is ingress protection rating and manufacturer series designation. Component selection must be validated against specific application environmental classifications and existing design documentation.

Frequently Asked Questions (FAQ)

Q: Can RT0W7106SNH directly replace UT0W7106SH in all applications?

A: RT0W7106SNH provides electrical and mechanical interface equivalence. The ingress protection rating differs (IP67 versus IP67/IP69K). Direct replacement is valid only when application environmental specifications do not require IP69K protection. Verify ingress protection requirements in system design documentation before substitution.

Q: What is the difference between IP67 and IP67/IP69K ratings?

A: IP67 provides dust-tight and waterproof protection. IP69K adds high-pressure jet protection. Applications involving high-pressure wash cycles require IP69K. Standard wet environments typically require IP67. Consult application environmental specifications to determine required rating.

Q: Are the contact configurations identical between these parts?

A: Both components use crimp contact type with contact size 20 in 6-position configuration. Contact compatibility is equivalent. Contacts are not included with either housing and must be sourced separately.

Q: Do these connectors require specific mating connectors?

A: Both receptacle housings are designed for female socket accommodation. Mating plug connectors must be compatible with 6-position, 10-6 shell size, bayonet lock fastening configuration. Verify mating connector specifications with connector series documentation.

Q: What is the operating temperature range for both components?

A: Both UT0W7106SH and RT0W7106SNH operate across -40°C to 105°C. Temperature performance is equivalent across both components.

Q: Are both components RoHS compliant?

A: Both components are ROHS3 compliant and REACH unaffected. Regulatory compliance is equivalent.

Q: What is the difference in insert material between the two parts?

A: UT0W7106SH uses thermoplastic glass-filled insert material. RT0W7106SNH uses thermoplastic insert material without specified glass fill. Both materials support equivalent electrical performance within specified operating parameters.