UT07104PH Equivalent & Substitute Parts

Part Overview

The UT07104PH is a 4-position circular connector receptacle housing manufactured by Souriau-Sunbank by Eaton, designed for panel mount applications with bayonet lock fastening. This component belongs to the Trim Trio® UTO series and is classified as Active product status with 1137 pieces currently in stock. The receptacle housing accommodates male pins and is specified for crimp and solder contact termination. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate alternative sourcing strategies while maintaining electrical and mechanical compatibility.

Substiute Parts

UT07104PH

Souriau-Sunbank by EatonIn Stock: 1168UT07104PH Datasheet

Current PartRFQ

RT07104PNH-K

Amphenol Sine Systems CorpIn Stock: 779RT07104PNH-K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the UT07104PH is determined by strict alignment of the following critical parameters:

Position Count: Both the main part and substitute must accommodate exactly 4 positions to ensure proper mating with corresponding connector plugs and pin configurations.

Shell Size - Insert: The 10-4 shell size specification must be identical to guarantee mechanical fit and alignment within the connector interface.

Mounting Configuration: Panel mount with bulkhead front side nut mounting feature is mandatory for installation compatibility in the target application.

Fastening Mechanism: Bayonet lock fastening type must be preserved to ensure secure mating and disconnection cycles.

Orientation: Normal (N) orientation must be maintained for proper connector alignment.

Ingress Protection Rating: IP67 classification (dust tight, waterproof) must be retained to preserve environmental sealing performance.

Operating Temperature Range: The -40°C to 105°C operating window must be supported by the substitute part.

Regulatory Compliance: ROHS3 compliance and REACH unaffected status must be maintained.

The substitute part RT07104PNH-K manufactured by Amphenol Sine Systems Corp satisfies all these critical parameters, making it a valid equivalent for the UT07104PH in applications requiring receptacle housing with male pin accommodation.

Parameter Comparison

Engineering Selection Recommendations

Both the UT07104PH and RT07104PNH-K maintain Active product status, ensuring continued manufacturer support and availability. Both components are ROHS3 compliant and REACH unaffected, satisfying current regulatory requirements for electronic component manufacturing and distribution.

The UT07104PH specifies contact termination as crimp and solder, while the RT07104PNH-K is specified for crimp termination only. This distinction affects contact installation methodology and must be evaluated against application requirements.

The UT07104PH shell material is specified as zinc alloy with halogen-free composition, whereas the RT07104PNH-K uses zinc die cast material. Both materials provide equivalent mechanical and environmental protection characteristics within the specified operating parameters.

The RT07104PNH-K includes electrical ratings (13A current, 250VAC/DC voltage) and contact finish specifications (gold mating surface with flash thickness), which are not provided for the UT07104PH. These additional specifications in the substitute part indicate enhanced electrical performance characteristics.

Selection between these parts should be based on specific application requirements regarding contact termination method, electrical load specifications, and material composition preferences, while maintaining compatibility with the critical mechanical and environmental parameters outlined in the Parameter Comparison table.

Frequently Asked Questions (FAQ)

Q: Can the RT07104PNH-K directly replace the UT07104PH in existing designs?

A: The RT07104PNH-K satisfies all critical mechanical and environmental parameters required for substitution, including shell size, position count, mounting configuration, fastening type, and ingress protection rating. However, the contact termination specification differs (crimp only versus crimp and solder), which must be evaluated against the specific application's contact installation requirements.

Q: What are the key compatibility criteria for 4-position circular connector receptacles?

A: Compatibility is determined by shell size (10-4), position count (4), mounting type (panel mount with bulkhead front side nut), fastening mechanism (bayonet lock), orientation (normal), ingress protection rating (IP67), and operating temperature range (-40°C to 105°C). All substitute parts must match these specifications exactly.

Q: Are both parts suitable for IP67-rated applications?

A: Yes, both the UT07104PH and RT07104PNH-K are rated for IP67 ingress protection, indicating dust-tight and waterproof performance. This rating is maintained across both components.

Q: What is the difference in shell material composition between these parts?

A: The UT07104PH uses zinc alloy with halogen-free specification, while the RT07104PNH-K uses zinc die cast material. Both materials provide equivalent mechanical strength and environmental protection within the specified operating parameters. The halogen-free specification of the UT07104PH may be relevant for specific regulatory or application requirements.

Q: Do both parts support the same operating temperature range?

A: Yes, both the UT07104PH and RT07104PNH-K support the identical operating temperature range of -40°C to 105°C.

Q: What inventory considerations should be evaluated?

A: The UT07104PH has 1137 pieces in stock, while the RT07104PNH-K has 755 pieces available. Inventory levels may influence sourcing decisions based on project timelines and volume requirements.

Q: Are both parts compliant with current regulatory standards?

A: Yes, both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.