UT062448PH Equivalent & Substitute Parts

Part Overview

The UT062448PH is a 48-position circular connector plug housing manufactured by Souriau-Sunbank by Eaton, part of the Trim Trio® UTO series. This free-hanging, in-line connector features a bayonet lock fastening mechanism and is designed for crimp contact applications. The connector is actively produced and maintains full compliance with RoHS3 and REACH regulations. Equivalent substitute parts are identified to provide procurement flexibility, inventory alternatives, and supply chain continuity when the primary part becomes unavailable or when design requirements permit cross-manufacturer compatibility.

Substiute Parts

UT062448PH

Souriau-Sunbank by EatonIn Stock: 762UT062448PH Datasheet

Current PartRFQ

RT062448PNH

Amphenol Sine Systems CorpIn Stock: 836RT062448PNH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the UT062448PH are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following matching criteria:

Mandatory Matching Parameters:

• 48-position connector configuration
• Plug housing type for male pins
• Shell size 24-48 insert compatibility
• Crimp contact type with size 16
• Free-hanging, in-line mounting orientation
• Bayonet lock fastening mechanism
• Nickel-plated zinc alloy shell construction
• Shielded configuration
• Operating temperature range of -40°C to 105°C
• IP67 minimum ingress protection rating
• UL94 V-0 flammability compliance
• RoHS3 compliance status

The substitute part RT062448PNH from Amphenol Sine Systems Corp meets all mandatory parameters and is classified as a direct equivalent. Both connectors are actively produced, maintain identical electrical and mechanical specifications, and support identical contact configurations.

Parameter Comparison

Engineering Selection Recommendations

UT062448PH (Souriau-Sunbank by Eaton): Select this part when Trim Trio® UTO series integration is required or when halogen-free shell material specification is mandatory. The UT062448PH provides enhanced ingress protection ratings (IP67/IP68/IP69K) and is specified with polyamide insert material. This part is actively produced with 722 units in current inventory.

RT062448PNH (Amphenol Sine Systems Corp): Select this part as a direct substitute when supply chain flexibility is required or when ecomate® RM series compatibility is acceptable. The RT062448PNH meets all mandatory electrical and mechanical parameters and maintains identical operating specifications. This part is actively produced with 813 units in current inventory. The thermoplastic insert material provides equivalent performance within the specified operating temperature range.

Both parts maintain full RoHS3 compliance, REACH unaffected status, and identical ECCN/HTSUS classifications, supporting unrestricted procurement and deployment in equivalent applications.

Frequently Asked Questions (FAQ)

Q: Can RT062448PNH be used as a direct replacement for UT062448PH?

A: Yes. Both connectors are 48-position plug housings with identical electrical and mechanical specifications, including contact type, size, fastening mechanism, operating temperature range, and ingress protection minimum rating. Both are actively produced and RoHS3 compliant.

Q: What are the differences between these two connectors?

A: The primary differences are manufacturer series designation (Trim Trio® UTO versus ecomate® RM), insert material composition (polyamide PA66 versus thermoplastic), and maximum ingress protection rating (IP67/IP68/IP69K versus IP67). The UT062448PH specifies halogen-free shell material, while the RT062448PNH does not explicitly state this requirement.

Q: Are the insert materials interchangeable?

A: Both insert materials (polyamide PA66 and thermoplastic) operate within the identical temperature range of -40°C to 105°C and support the same crimp contact configuration. Material selection should be based on specific application environmental requirements and design specifications.

Q: Do these connectors require contacts to be purchased separately?

A: Yes. Both the UT062448PH and RT062448PNH are supplied as housings without contacts included. Contacts must be specified and procured separately based on application requirements.

Q: What is the significance of the bayonet lock fastening type?

A: The bayonet lock mechanism provides secure coupling between mating connectors through rotational engagement. Both substitute parts use identical bayonet lock fastening, ensuring mechanical compatibility in applications designed for this coupling method.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts maintain identical RoHS3 compliance, REACH unaffected status, UL94 V-0 flammability rating, and EAR99 export classification. Both are assigned the same HTSUS code (8538.90.8180).

Q: Can these connectors be used in applications requiring IP68 or IP69K protection?

A: The UT062448PH is rated for IP67/IP68/IP69K protection. The RT062448PNH is rated for IP67 protection. For applications requiring IP68 or IP69K ratings, the UT062448PH is the specified choice.

Q: What is the difference between "Contacts Not Included" and the connector housing?

A: The connector housing (plug housing) is the outer shell structure that provides mechanical coupling, shielding, and environmental protection. Contacts are the internal electrical elements that establish the actual electrical connections. These must be sourced separately and inserted into the housing.