UST1C470MDD Equivalent & Substitute Parts

Part Overview

The UST1C470MDD is a 47 µF, 16 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is classified as obsolete, with 1000 hours lifetime rating at 105°C. Due to its obsolete status, equivalent and substitute parts from active product lines or alternative manufacturers are necessary for ongoing design support and procurement continuity.

Substiute Parts

UST1C470MDD
NichiconIn Stock: 1139UST1C470MDD Datasheet
UST1C470MDD
Current Part
UPJ1C470MDD
NichiconIn Stock: 3146UPJ1C470MDD Datasheet
UPJ1C470MDD
Similar
UPM1C470MDD
NichiconIn Stock: 2466UPM1C470MDD Datasheet
UPM1C470MDD
Similar
UPS1C470MDD
NichiconIn Stock: 6850UPS1C470MDD Datasheet
UPS1C470MDD
Similar
UPV1C470MFD
NichiconIn Stock: 2209UPV1C470MFD Datasheet
UPV1C470MFD
Similar
UVZ1H470MED
NichiconIn Stock: 3622UVZ1H470MED Datasheet
UVZ1H470MED
Similar
UWT1C470MCL1GB
NichiconIn Stock: 16731UWT1C470MCL1GB Datasheet
UWT1C470MCL1GB
Similar
EEA-GA1C470
Panasonic Electronic ComponentsIn Stock: 8448EEA-GA1C470 Datasheet
EEA-GA1C470
Direct
ECA-1CHG470
Panasonic Electronic ComponentsIn Stock: 47836ECA-1CHG470 Datasheet
ECA-1CHG470
Similar
EEA-GA1C470B
Panasonic Electronic ComponentsIn Stock: 13688EEA-GA1C470B Datasheet
EEA-GA1C470B
Similar
EEA-GA1C470H
Panasonic Electronic ComponentsIn Stock: 4632EEA-GA1C470H Datasheet
EEA-GA1C470H
Similar
EEU-FC1C470
Panasonic Electronic ComponentsIn Stock: 17917EEU-FC1C470 Datasheet
EEU-FC1C470
Similar
EEU-FC1C470B
Panasonic Electronic ComponentsIn Stock: 1067EEU-FC1C470B Datasheet
EEU-FC1C470B
Similar
EKMG160ELL470ME11D
Chemi-ConIn Stock: 1827EKMG160ELL470ME11D Datasheet
EKMG160ELL470ME11D
Similar
ELXZ160ELL470MEB5D
Chemi-ConIn Stock: 3533ELXZ160ELL470MEB5D Datasheet
ELXZ160ELL470MEB5D
Similar
SEK470M016ST
Cornell Dubilier Electronics (CDE)In Stock: 16644SEK470M016ST Datasheet
SEK470M016ST
Similar

Key Parameters

Parameter Value
Capacitance 47 µF
Voltage Rating 16 V
Tolerance ±20%
Lifetime @ 105°C 1000 Hrs
Operating Temperature Range -55°C ~ 105°C
Polarization Polar
Package Type Radial, Can
Mounting Type Through Hole
Lead Spacing 0.098" (2.50mm)
Diameter 0.248" (6.30mm)
Height 0.315" (8.00mm)
RoHS Status ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the UST1C470MDD is determined by the following critical parameters:

  • Capacitance: 47 µF (exact match required)
  • Voltage Rating: 16 V minimum (equal or higher acceptable)
  • Tolerance: ±20% (matching or tighter tolerance acceptable)
  • Package Type: Radial, Can (physical form factor)
  • Mounting Type: Through Hole (PCB assembly compatibility)
  • Operating Temperature Range: -55°C ~ 105°C (minimum requirement)
  • Polarization: Polar (electrical characteristic)
  • RoHS Compliance: ROHS3 Compliant (regulatory requirement)

Substitutes are grouped into three categories:

  1. Nichicon Series Equivalents (UPJ1C470MDD, UPM1C470MDD, UPS1C470MDD, UPV1C470MFD): Same manufacturer, same capacitance and voltage, with improved lifetime ratings (2000–5000 hours) and enhanced ripple current handling.

  2. Nichicon Higher Voltage Alternative (UVZ1H470MED): Same manufacturer and capacitance, rated for 50 V (higher voltage rating), suitable where voltage margin is required.

  3. Nichicon Surface Mount Option (UWT1C470MCL1GB): Active product with SMD package, same electrical specifications but different mounting technology.

  4. Panasonic Equivalents (EEA-GA1C470, ECA-1CHG470, EEA-GA1C470B, EEA-GA1C470H): Alternative manufacturer with matching capacitance, voltage, and tolerance. All are active products with ROHS3 compliance.

Parameter Comparison

Part Number Manufacturer Capacitance Voltage Tolerance Lifetime @ 105°C Package Mounting Lead Spacing Diameter Height Product Status RoHS
UST1C470MDD Nichicon 47 µF 16 V ±20% 1000 Hrs Radial, Can Through Hole 0.098" (2.50mm) 0.248" (6.30mm) 0.315" (8.00mm) Obsolete ROHS3
UPJ1C470MDD Nichicon 47 µF 16 V ±20% 2000 Hrs Radial, Can Through Hole 0.079" (2.00mm) 0.197" (5.00mm) 0.472" (12.00mm) Obsolete ROHS3
UPM1C470MDD Nichicon 47 µF 16 V ±20% 2000 Hrs Radial, Can Through Hole 0.079" (2.00mm) 0.197" (5.00mm) 0.492" (12.50mm) Obsolete ROHS3
UPS1C470MDD Nichicon 47 µF 16 V ±20% 2000 Hrs Radial, Can Through Hole 0.079" (2.00mm) 0.197" (5.00mm) 0.492" (12.50mm) Obsolete ROHS3
UPV1C470MFD Nichicon 47 µF 16 V ±20% 5000 Hrs Radial, Can Through Hole 0.079" (2.00mm) 0.197" (5.00mm) 0.492" (12.50mm) Obsolete ROHS3
UVZ1H470MED Nichicon 47 µF 50 V ±20% 1000 Hrs Radial, Can Through Hole 0.098" (2.50mm) 0.248" (6.30mm) 0.492" (12.50mm) Obsolete ROHS3
UWT1C470MCL1GB Nichicon 47 µF 16 V ±20% 1000 Hrs Radial, Can - SMD Surface Mount 0.248" (6.30mm) 0.213" (5.40mm) Active ROHS3
EEA-GA1C470 Panasonic 47 µF 16 V ±20% 1000 Hrs Radial, Can Through Hole 0.098" (2.50mm) 0.248" (6.30mm) 0.276" (7.00mm) Active ROHS3
ECA-1CHG470 Panasonic 47 µF 16 V ±20% 1000 Hrs Radial, Can Through Hole 0.079" (2.00mm) 0.197" (5.00mm) 0.472" (12.00mm) Active ROHS3
EEA-GA1C470B Panasonic 47 µF 16 V ±20% 1000 Hrs Radial, Can Through Hole 0.197" (5.00mm) 0.248" (6.30mm) 0.276" (7.00mm) Active ROHS3
EEA-GA1C470H Panasonic 47 µF 16 V ±20% 1000 Hrs Radial, Can Through Hole 0.098" (2.50mm) 0.248" (6.30mm) 0.276" (7.00mm) Active ROHS3

Engineering Selection Recommendations

Direct Replacement (Same Form Factor)

EEA-GA1C470H (Panasonic) and EEA-GA1C470 (Panasonic) are the preferred direct replacements. Both match the original lead spacing (0.098", 2.50mm) and diameter (0.248", 6.30mm), with active product status ensuring long-term availability. Both are ROHS3 compliant and rated for 1000 hours at 105°C, matching the original specification.

Nichicon Alternatives with Improved Lifetime

UPJ1C470MDD, UPM1C470MDD, and UPS1C470MDD offer extended lifetime ratings (2000 hours) while maintaining 16 V rating and ±20% tolerance. These parts feature reduced lead spacing (0.079", 2.00mm) and smaller diameter (0.197", 5.00mm), requiring PCB layout verification before substitution.

Extended Lifetime Option

UPV1C470MFD (Nichicon) provides 5000-hour lifetime at 105°C with the same electrical specifications. Physical dimensions match the UPJ/UPM/UPS series, requiring layout confirmation.

Higher Voltage Margin

UVZ1H470MED (Nichicon) is rated for 50 V, providing additional voltage margin in applications where circuit voltage may exceed 16 V. Physical dimensions match the original part (0.248" diameter, 0.098" lead spacing).

Surface Mount Alternative

UWT1C470MCL1GB (Nichicon) is an active SMD variant with identical electrical specifications. This option applies only to new designs or rework scenarios where SMD assembly is feasible.

Alternative Manufacturer Options

ECA-1CHG470 (Panasonic, active status) and EEA-GA1C470B (Panasonic, active status) provide equivalent electrical performance with different lead spacing configurations. Lead spacing verification is required before PCB substitution.

Frequently Asked Questions (FAQ)

Q: Can I substitute UPJ1C470MDD for UST1C470MDD directly on the PCB?

A: Electrical substitution is valid (same capacitance, voltage, tolerance, and temperature range). However, physical dimensions differ: UPJ1C470MDD has 0.079" lead spacing versus the original 0.098" spacing. PCB hole pattern verification is required before installation.

Q: What is the difference between Nichicon UPJ, UPM, and UPS series?

A: All three series share identical electrical specifications (47 µF, 16 V, ±20%, 2000-hour lifetime). Differences exist in ripple current handling and impedance characteristics. UPS1C470MDD offers the highest ripple current at high frequency (160 mA @ 100 kHz). Series selection depends on application ripple current requirements.

Q: Is UVZ1H470MED a suitable replacement?

A: UVZ1H470MED is electrically compatible (47 µF, ±20%, same temperature range) but rated for 50 V instead of 16 V. This higher voltage rating is acceptable for direct substitution and provides additional safety margin. Physical dimensions match the original part. Use this option when voltage margin is beneficial.

Q: Why is UWT1C470MCL1GB listed as an alternative if it is surface mount?

A: UWT1C470MCL1GB is included for reference in new design scenarios or PCB rework where SMD assembly is available. It is not suitable for through-hole PCB replacement without significant rework.

Q: Are Panasonic EEA-GA1C470 and EEA-GA1C470H interchangeable?

A: Both are Panasonic GA-A series with identical electrical specifications and active product status. The primary difference is lead spacing: EEA-GA1C470H uses 0.098" (2.50mm) spacing matching the original UST1C470MDD, while EEA-GA1C470 uses the same spacing. Both are suitable direct replacements with PCB hole pattern verification.

Q: What does "active product status" mean for component selection?

A: Active status indicates the manufacturer currently produces and supports the part, ensuring long-term availability and consistent supply. Obsolete parts like UST1C470MDD are no longer manufactured, making active alternatives necessary for production continuity.

Q: Can I use a 47 µF capacitor with different tolerance (e.g., ±10%)?

A: Tighter tolerance (±10%) is acceptable as a substitute for ±20%. Looser tolerance is not recommended without circuit analysis, as it may exceed design specifications.

Q: What is the significance of lead spacing differences?

A: Lead spacing determines PCB hole pattern compatibility. Original 0.098" (2.50mm) spacing requires matching hole spacing. Alternatives with 0.079" (2.00mm) spacing require PCB modification or cannot be installed without rework.

Request Quote (Ships tomorrow)