Equivalent & Substitute Parts for USF1C470MDD

Part Overview

The USF1C470MDD is a 47 µF, 16 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 1000 hours at 105°C and is designed for general-purpose applications. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing design support and component sourcing.

Key Parameters

Parameter	Value
Capacitance	47 µF
Voltage Rating	16 V
Tolerance	±20%
Lifetime @ 105°C	1000 Hrs
Operating Temperature Range	-55°C ~ 105°C
Polarization	Polar
Mounting Type	Through Hole
Package Type	Radial, Can
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the USF1C470MDD is determined by the following critical parameters:

Capacitance Value: 47 µF (exact match required)
Voltage Rating: 16 V minimum (higher voltage ratings are acceptable)
Tolerance: ±20% (matching tolerance preferred)
Polarization: Polar (must match)
Mounting Type: Through Hole (must match for PCB compatibility)
Package Type: Radial, Can (must match for form factor)
Operating Temperature Range: -55°C ~ 105°C (must support full range)
RoHS Compliance: ROHS3 Compliant (regulatory requirement)

Substitute parts are grouped into two categories:

Category 1: Direct Equivalents (Same Voltage, Same Lifetime) Parts with identical 16 V rating and comparable or extended lifetime specifications. These provide direct replacement capability with minimal design impact.

Category 2: Enhanced Performance Substitutes (Same Voltage, Extended Lifetime) Parts with identical 16 V rating but extended lifetime ratings (2000 Hrs or 5000 Hrs @ 105°C). These offer improved reliability margins while maintaining electrical compatibility.

Category 3: Higher Voltage Substitutes (25 V Rating) Parts rated at 25 V with 47 µF capacitance. These are electrically compatible but occupy larger physical footprints and are suitable only when PCB space permits.

Category 4: Surface Mount Alternative SMD variant with identical electrical specifications but different mounting technology. Suitable only for surface-mount PCB designs.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Lifetime @ 105°C	Impedance	Lead Spacing	Size (Dia)	Height (Max)	Mounting	Status
USF1C470MDD	Nichicon	47 µF	16 V	1000 Hrs	800 mOhms	0.098" (2.50mm)	0.248" (6.30mm)	0.315" (8.00mm)	Through Hole	Obsolete
UPJ1C470MDD	Nichicon	47 µF	16 V	2000 Hrs	1.3 Ohms	0.079" (2.00mm)	0.197" (5.00mm)	0.472" (12.00mm)	Through Hole	Obsolete
UPM1C470MDD	Nichicon	47 µF	16 V	2000 Hrs	800 mOhms	0.079" (2.00mm)	0.197" (5.00mm)	0.492" (12.50mm)	Through Hole	Obsolete
UPM1E470MED	Nichicon	47 µF	25 V	2000 Hrs	550 mOhms	0.098" (2.50mm)	0.248" (6.30mm)	0.492" (12.50mm)	Through Hole	Obsolete
UPS1C470MDD	Nichicon	47 µF	16 V	2000 Hrs	1.5 Ohms	0.079" (2.00mm)	0.197" (5.00mm)	0.492" (12.50mm)	Through Hole	Obsolete
UPV1C470MFD	Nichicon	47 µF	16 V	5000 Hrs	1.4 Ohms	0.079" (2.00mm)	0.197" (5.00mm)	0.492" (12.50mm)	Through Hole	Obsolete
UWT1C470MCL1GB	Nichicon	47 µF	16 V	1000 Hrs	—	—	0.248" (6.30mm)	0.213" (5.40mm)	Surface Mount	Active
EEU-FC1C470	Panasonic	47 µF	16 V	1000 Hrs	800 mOhms	0.079" (2.00mm)	0.197" (5.00mm)	0.472" (12.00mm)	Through Hole	Active
EEU-FC1C470B	Panasonic	47 µF	16 V	1000 Hrs	800 mOhms	0.197" (5.00mm)	0.197" (5.00mm)	0.571" (14.50mm)	Through Hole	Active
ELXZ160ELL470MEB5D	Chemi-Con	47 µF	16 V	2000 Hrs	500 mOhms	0.079" (2.00mm)	0.197" (5.00mm)	0.512" (13.00mm)	Through Hole	Active

Engineering Selection Recommendations

For Direct Replacement with Active Status: EEU-FC1C470 (Panasonic) and ELXZ160ELL470MEB5D (Chemi-Con) are active products with identical electrical specifications to the USF1C470MDD. Both are ROHS3 compliant and AEC-Q200 rated for automotive applications. EEU-FC1C470 matches the original impedance specification at 800 mOhms and is recommended for applications requiring minimal design validation.

For Extended Reliability: UPV1C470MFD (Nichicon) provides 5000-hour lifetime at 105°C, the highest available among 16 V, 47 µF options. This part is suitable for applications requiring enhanced long-term reliability, though it is obsolete and may have limited availability.

For Voltage Margin Applications: UPM1E470MED (Nichicon) at 25 V rating provides additional voltage margin over the original 16 V specification. This part is suitable only when PCB layout accommodates the larger physical dimensions (0.248" diameter, 0.492" height).

For Surface Mount Designs: UWT1C470MCL1GB (Nichicon) is the only active surface-mount option with matching electrical specifications. This part is suitable exclusively for SMD PCB designs and is not compatible with through-hole layouts.

Frequently Asked Questions (FAQ)

Q: Can I use a 25 V rated capacitor in place of the 16 V USF1C470MDD? A: Yes. Higher voltage ratings are electrically compatible and provide additional safety margin. However, the 25 V variant (UPM1E470MED) has a larger physical footprint (0.248" diameter, 0.492" height versus 0.315" height for the original). Verify PCB layout clearance before substitution.

Q: What is the difference between Nichicon, Panasonic, and Chemi-Con substitutes? A: All three manufacturers produce equivalent 47 µF, 16 V aluminum electrolytic capacitors meeting the same electrical and mechanical specifications. Selection depends on availability, lead time, and procurement preferences. Panasonic EEU-FC1C470 and Chemi-Con ELXZ160ELL470MEB5D are currently active products.

Q: Does the lead spacing difference affect compatibility? A: Yes. The original USF1C470MDD has 0.098" (2.50mm) lead spacing. Most substitutes use 0.079" (2.00mm) spacing. Verify PCB pad spacing before substitution. EEU-FC1C470B uses 0.197" (5.00mm) spacing and requires different PCB layout.

Q: Which substitute offers the best long-term reliability? A: UPV1C470MFD (Nichicon) provides 5000-hour lifetime at 105°C, compared to 1000 hours for the original. However, this part is obsolete. Among active products, ELXZ160ELL470MEB5D (Chemi-Con) offers 2000-hour lifetime with lower impedance (500 mOhms).

Q: Are all substitutes ROHS3 compliant? A: Yes. All listed substitute parts are ROHS3 compliant and meet current regulatory requirements.

Q: Can I use the SMD variant UWT1C470MCL1GB as a substitute? A: No. The UWT1C470MCL1GB is a surface-mount component and is not compatible with through-hole PCB designs. It is suitable only for SMD assembly processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message