USCC2I Equivalent & Substitute Parts

Part Overview

The USCC2I is a 600V 30A 2-pole cartridge fuse holder with indicator manufactured by Mersen USA Newburyport-MA L.L.C. This component is classified as an uncategorized electrical device and maintains Active product status. The device is ROHS3 compliant and designed for industrial electrical distribution applications requiring reliable overcurrent protection and circuit isolation.

Finding equivalent and substitute parts is necessary to ensure supply chain continuity, optimize procurement costs, and maintain compatibility with existing electrical systems when the primary part becomes unavailable or when system requirements necessitate alternative configurations.

Substiute Parts

USCC2I

Mersen USA Newburyport-MA L.L.C.In Stock: 999USCC2I Datasheet

Current PartRFQ

LPSC0002ZXID

Littelfuse Inc.In Stock: 100335LPSC0002ZXID Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the USCC2I is determined by strict alignment of the following electrical and mechanical parameters:

• Voltage Rating: Must be rated for 600V minimum
• Current Rating: Must be rated for 30A
• Number of Circuits/Poles: Must accommodate 2-circuit configuration
• Fuse Type: Must be compatible with Class CC cartridge fuses (13/32" x 1-1/2")
• Product Status: Must be Active to ensure ongoing availability and support
• Compliance: Must maintain ROHS3 compliance for regulatory alignment

The LPSC0002ZXID from Littelfuse Inc. qualifies as a direct substitute based on these parameters. Both components are rated for 600V, 30A operation, support 2-circuit configurations, accept Class CC cartridge fuses, maintain Active product status, and comply with ROHS3 requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the USCC2I and LPSC0002ZXID maintain Active product status, ensuring continued manufacturer support and availability. Both components are ROHS3 compliant, meeting current environmental and regulatory requirements for industrial electrical applications.

Selection between these components should be based on system-specific requirements including mounting configuration (DIN Rail availability for LPSC0002ZXID), termination style compatibility (Screw Terminal and Pressure Plate for LPSC0002ZXID), and existing inventory or procurement agreements. The electrical performance parameters—600V rating, 30A capacity, and 2-circuit configuration—are equivalent across both options.

Frequently Asked Questions (FAQ)

Q: Can the LPSC0002ZXID directly replace the USCC2I in existing installations?

A: Yes, provided that the mounting configuration and termination style are compatible with your system. The LPSC0002ZXID is rated for DIN Rail mounting with Screw Terminal and Pressure Plate termination. Verify that your installation supports these specifications before substitution.

Q: What fuse types are compatible with these cartridge fuse holders?

A: Both the USCC2I and LPSC0002ZXID are designed for Class CC cartridge fuses with dimensions of 13/32" x 1-1/2" (10mm x 38mm). Ensure that replacement fuses meet this specification.

Q: Are both parts suitable for 600V, 30A applications?

A: Yes. Both the USCC2I and LPSC0002ZXID are rated for 600V operation at 30A continuous current with 2-circuit capacity, making them electrically equivalent for this application class.

Q: Do both parts meet current environmental compliance standards?

A: Yes. Both components are ROHS3 compliant and maintain Active product status, confirming compliance with current environmental regulations and ongoing manufacturer support.

Q: What is the difference in mounting between these two parts?

A: The LPSC0002ZXID is specified for DIN Rail mounting with Screw Terminal and Pressure Plate termination. The USCC2I mounting configuration is not detailed in the provided specifications. Confirm mounting compatibility with your system requirements before substitution.