USB-AM-S-S-B-SM1 Equivalent & Substitute Parts

Part Overview

The USB-AM-S-S-B-SM1 is a USB 2.0 Type-A plug connector manufactured by Samtec Inc., configured for surface mount and through-hole applications with right-angle orientation. This connector features 4 positions, gold-plated contacts, and board guide support for reliable mating cycles up to 1500 cycles. The part maintains Active product status and is suitable for applications requiring shielded USB 2.0 interface connectivity with horizontal mounting orientation.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct component selection for design flexibility and supply chain optimization.

Substiute Parts

USB-AM-S-S-B-SM1-R

Samtec Inc.In Stock: 756USB-AM-S-S-B-SM1-R Datasheet

Current PartRFQ

USB-AM-S-F-B-SM1

Samtec Inc.In Stock: 1504USB-AM-S-F-B-SM1 Datasheet

Parametric EquivalentRFQ

USB-AM-S-S-B-SM1

Samtec Inc.In Stock: 1134USB-AM-S-S-B-SM1 Datasheet

Parametric EquivalentRFQ

0480371000

MolexIn Stock: 80380480371000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for USB-AM-S-S-B-SM1 are identified based on strict alignment of the following critical parameters:

Electrical Compatibility Parameters:

• USB 2.0 specification compliance
• 4-position contact configuration
• Plug gender orientation
• Shielded construction
• Gold contact finish

Mechanical Compatibility Parameters:

• Surface mount and through-hole mounting capability
• Right-angle orientation
• Horizontal mounting feature
• Solder termination method
• Board guide support

Environmental Parameters:

• Operating temperature range compatibility
• Rated voltage specifications

The three substitute parts listed below meet all critical electrical and mechanical parameters required for direct substitution in applications designed for USB-AM-S-S-B-SM1.

Parameter Comparison

Engineering Selection Recommendations

Samtec USB-AM-S-F-B-SM1: This part is a direct parametric equivalent to USB-AM-S-S-B-SM1, with identical electrical and mechanical specifications. Both parts maintain Active product status and are manufactured by Samtec Inc. The USB-AM-S-F-B-SM1 carries ROHS3 compliance and REACH Unaffected status with MSL 1 rating, providing regulatory alignment for applications requiring environmental compliance documentation.

Samtec USB-AM-S-S-B-SM1 (Substitute listing): This part designation appears as a substitute option and maintains identical specifications to the main part number, including operating temperature range, voltage rating, and mating cycle performance. Active product status and equivalent compliance certifications support continued availability.

Molex 0480371000: This cross-manufacturer substitute from Molex meets all critical electrical and mechanical parameters for USB 2.0 Type-A plug connector applications. The part features higher rated voltage (150VAC versus 30VAC) and operates across a narrower temperature range (-20°C ~ 85°C versus -50°C ~ 85°C). Molex 0480371000 carries ROHS3 compliance, REACH Unaffected status, and MSL 1 rating. Current rating specification of 1.5A and steel shell material (SPCC) with UL94 V-0 flammability rating provide additional mechanical robustness. Mating cycle specification is not provided for this part.

All three substitute parts maintain Active product status and support direct component selection based on supply availability, compliance requirements, and application-specific environmental constraints.

Frequently Asked Questions (FAQ)

Q: Can USB-AM-S-F-B-SM1 be used as a direct replacement for USB-AM-S-S-B-SM1?

A: Yes. Both parts share identical electrical specifications (USB 2.0, 4-position, plug gender), mechanical configuration (surface mount, right-angle, horizontal orientation), and environmental ratings (-50°C ~ 85°C, 30VAC, 1500 mating cycles). Both are manufactured by Samtec Inc. and maintain Active product status.

Q: What are the key differences between the Samtec and Molex substitute options?

A: The Molex 0480371000 operates across a narrower temperature range (-20°C ~ 85°C versus -50°C ~ 85°C) and carries a higher rated voltage specification (150VAC versus 30VAC). The Molex part includes a steel shell material with UL94 V-0 flammability rating and specifies 1.5A current rating. Mating cycle performance is not specified for the Molex part. All other electrical and mechanical parameters align with Samtec specifications.

Q: Are all substitute parts RoHS and REACH compliant?

A: The Samtec USB-AM-S-F-B-SM1 and USB-AM-S-S-B-SM1 substitute parts carry explicit ROHS3 Compliant and REACH Unaffected certifications with MSL 1 (Unlimited) ratings. The Molex 0480371000 also carries ROHS3 Compliant and REACH Unaffected status with MSL 1 rating. Compliance documentation should be verified against specific application requirements.

Q: What mounting configurations are supported by these substitute parts?

A: All substitute parts support both surface mount and through-hole mounting with right-angle orientation and horizontal mounting feature. Solder termination is standard across all options. Board guide support is included on all parts.

Q: Can these connectors be used interchangeably in existing PCB designs?

A: Electrical and mechanical parameters are equivalent across all substitute parts, supporting direct PCB footprint compatibility. Physical dimensions, pin spacing, and mounting hole locations must be verified against original design specifications and manufacturer datasheets to confirm mechanical fit.

Q: What inventory levels are available for each substitute part?

A: USB-AM-S-S-B-SM1 (main): 695 Pcs. USB-AM-S-F-B-SM1: 1400 Pcs. USB-AM-S-S-B-SM1 (substitute): 1099 Pcs. Molex 0480371000: 7928 Pcs. Inventory levels support component selection based on supply chain requirements and lead time considerations.