USB7016T/KDX Equivalent & Substitute Parts

Part Overview

The USB7016T/KDX is an active USB Hub Controller manufactured by Microchip Technology, designed for USB 3.1 GEN1 applications without Power Delivery functionality. This component integrates USB 2.0 and USB 3.2 protocol support with GPIO, I2C, and SPI interfaces in a 100-pin VQFN package. The device is classified as Active product status with full AEC-Q100 automotive qualification and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, interface protocols, package configurations, and compliance certifications align with the original component requirements.

Substiute Parts

USB7016T/KDX

Microchip TechnologyIn Stock: 3293USB7016T/KDX Datasheet

Current PartRFQ

USB7006T/KDX

Microchip TechnologyIn Stock: 5889USB7006T/KDX Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the USB7016T/KDX is determined by strict alignment across the following parameters:

Critical Matching Parameters:

• Manufacturer: Microchip Technology
• Function: Hub Controller
• Protocol: USB
• Interface Types: GPIO, I2C, SPI, USB
• Standards: USB 2.0, USB 3.2
• Voltage Supply Range: 1.08V ~ 1.32V, 3V ~ 3.6V
• Operating Temperature: 0°C ~ 70°C (TA)
• Package Configuration: 100-VQFN (12x12) Exposed Pad
• Grade: Automotive
• Qualification: AEC-Q100
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 3 (168 Hours)
• REACH Status: REACH Unaffected
• Product Status: Active

The USB7006T/KDX meets all specified parameters and qualifies as a parametric equivalent substitute for the USB7016T/KDX.

Parameter Comparison

Engineering Selection Recommendations

The USB7006T/KDX qualifies as a direct parametric equivalent to the USB7016T/KDX based on complete alignment of electrical specifications, interface protocols, package configuration, and compliance certifications. Both components maintain Active product status with identical automotive-grade qualification (AEC-Q100) and ROHS3 compliance. The 100-VQFN (12x12) package footprint, voltage supply ranges, operating temperature specifications, and interface capabilities are fully matched. Selection between these parts is determined by application-specific requirements and inventory availability rather than technical compatibility constraints.

Frequently Asked Questions (FAQ)

Q: Can the USB7006T/KDX be used as a direct replacement for the USB7016T/KDX?

A: Yes. The USB7006T/KDX meets all specified electrical, functional, and compliance parameters required for substitution. Both components share identical package configurations, voltage specifications, interface protocols, and automotive qualifications.

Q: Are the package dimensions identical between these parts?

A: Yes. Both the USB7016T/KDX and USB7006T/KDX use the 100-VQFN (12x12) Exposed Pad package configuration with identical physical dimensions and pin layouts.

Q: Do both parts support the same interface protocols?

A: Yes. Both components support GPIO, I2C, SPI, and USB interfaces with USB 2.0 and USB 3.2 standards compliance.

Q: Are there any differences in voltage supply requirements?

A: No. Both parts operate with identical voltage supply ranges of 1.08V ~ 1.32V and 3V ~ 3.6V.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both the USB7016T/KDX and USB7006T/KDX carry Automotive grade classification with AEC-Q100 qualification and ROHS3 compliance.

Q: What is the operating temperature range for both parts?

A: Both components operate across the identical temperature range of 0°C ~ 70°C (TA).

Q: Are there any moisture sensitivity differences?

A: No. Both parts share Moisture Sensitivity Level 3 (168 Hours) classification.

Q: Is the REACH compliance status the same for both parts?

A: Yes. Both components maintain REACH Unaffected status.