UPW1V331MPD1CV Equivalent & Substitute Parts

Part Overview

The UPW1V331MPD1CV is a 330 µF, 35 V aluminum electrolytic capacitor manufactured by Nichicon in a radial, can package. This component is rated for automotive applications with AEC-Q200 compliance and designed for 5000 hours of operation at 105°C. The part is currently active in production with inventory availability. Equivalent substitute parts are identified when they maintain identical electrical specifications, mechanical dimensions, and compliance ratings to ensure direct functional replacement in circuit applications.

Substiute Parts

UPW1V331MPD1CV

NichiconIn Stock: 1117UPW1V331MPD1CV Datasheet

Current PartRFQ

ELXZ350ELL331MJ16S

Chemi-ConIn Stock: 2526ELXZ350ELL331MJ16S Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the UPW1V331MPD1CV are qualified based on strict equivalence across the following parameters:

• Capacitance value: 330 µF (exact match required)
• Voltage rating: 35 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime specification: 5000 Hrs @ 105°C (exact match required)
• Operating temperature range: -55°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)
• Package configuration: Radial, Can (exact match required)
• Lead spacing: 0.197" (5.00 mm) (exact match required)
• Physical dimensions: 0.394" Dia × 0.689" Height (exact match required)
• Mounting type: Through Hole (exact match required)
• Compliance rating: AEC-Q200 (exact match required)
• Application category: Automotive (exact match required)

The ELXZ350ELL331MJ16S manufactured by Chemi-Con meets all these criteria and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the UPW1V331MPD1CV and ELXZ350ELL331MJ16S are active production parts with AEC-Q200 automotive compliance. Selection between these parts is based on availability and supply chain requirements. The ELXZ350ELL331MJ16S carries additional compliance documentation including ROHS3 compliance and REACH unaffected status. Both parts meet identical electrical and mechanical specifications for direct substitution in automotive applications requiring 330 µF, 35 V aluminum electrolytic capacitors with 5000-hour lifetime ratings at 105°C.

Frequently Asked Questions (FAQ)

Q: Can the ELXZ350ELL331MJ16S replace the UPW1V331MPD1CV in my circuit?

A: Yes. Both parts are parametric equivalents with identical capacitance, voltage rating, tolerance, lifetime specification, operating temperature range, physical dimensions, lead spacing, and AEC-Q200 compliance. Direct substitution is supported.

Q: Are there differences in ripple current ratings between these parts?

A: The ripple current at 120 Hz differs between the two parts (682.5 mA for UPW1V331MPD1CV versus 525 mA for ELXZ350ELL331MJ16S). However, both meet the 1.05 A ripple current specification at 100 kHz. Verify ripple current requirements for your specific application before selection.

Q: Do both parts have the same physical footprint?

A: Yes. Both parts are packaged in identical radial, can configuration with 0.197" (5.00 mm) lead spacing, 0.394" (10.00 mm) diameter, and 0.689" (17.50 mm) maximum seated height. PCB layout compatibility is maintained.

Q: What compliance certifications apply to both parts?

A: Both parts carry AEC-Q200 automotive compliance. The ELXZ350ELL331MJ16S additionally documents ROHS3 compliance and REACH unaffected status.

Q: Are these parts suitable for automotive applications?

A: Yes. Both parts are rated for automotive applications with AEC-Q200 compliance and 5000-hour lifetime specifications at 105°C operating temperature.