UPT2W560MHD Equivalent & Substitute Parts

Part Overview

The UPT2W560MHD is a 56 µF, 450 V aluminum electrolytic capacitor in radial, can package manufactured by Nichicon. This component is rated for 5000 hours at 105°C and is designed for general-purpose applications requiring through-hole mounting. The product is currently active in production. Substitute parts may be necessary due to supply constraints, inventory availability, or specific application requirements where alternative performance characteristics are acceptable.

Substiute Parts

UPT2W560MHD

NichiconIn Stock: 896UPT2W560MHD Datasheet

Current PartRFQ

EEU-EE2W560

Panasonic Electronic ComponentsIn Stock: 1241EEU-EE2W560 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The EEU-EE2W560 from Panasonic Electronic Components qualifies as a substitute based on the following matching parameters:

• Capacitance: 56 µF (identical)
• Voltage Rating: 450 V (identical)
• Tolerance: ±20% (identical)
• Operating Temperature Range: -25°C ~ 105°C (identical)
• Mounting Type: Through Hole (identical)
• Package / Case: Radial, Can (identical)
• Lead Spacing: 0.295" (7.50mm) (identical)
• RoHS Status: ROHS3 Compliant (identical)

The substitute part maintains electrical and mechanical compatibility within the specified parameter set. Differences in physical dimensions (can diameter and height) and lifetime rating do not disqualify substitution when the core electrical specifications and mounting requirements are met.

Parameter Comparison

Engineering Selection Recommendations

Both parts meet ROHS3 compliance and REACH unaffected status. The UPT2W560MHD is the preferred choice for new designs due to its active product status. The EEU-EE2W560 is suitable for replacement applications where the substitute is already in inventory or where the extended lifetime rating (10000 Hrs @ 105°C versus 5000 Hrs @ 105°C) provides additional margin. Physical dimension differences must be verified against PCB layout constraints before substitution, as the EEU-EE2W560 has a larger diameter (18.00mm versus 16.00mm) but shorter height (34.60mm versus 37.00mm).

Frequently Asked Questions (FAQ)

Q: Can the EEU-EE2W560 be used as a direct replacement for the UPT2W560MHD?

A: Yes, provided that PCB layout accommodates the larger can diameter (18.00mm versus 16.00mm). The electrical specifications, lead spacing, and mounting type are identical.

Q: What is the significance of the different lifetime ratings?

A: The EEU-EE2W560 is rated for 10000 hours at 105°C compared to 5000 hours for the UPT2W560MHD. This indicates extended operational life under thermal stress, though both parts operate within the same temperature range and voltage specifications.

Q: Are there any compliance differences between these parts?

A: Both parts are ROHS3 compliant, REACH unaffected, and carry the same ECCN and HTSUS classifications. No compliance barriers exist for substitution.

Q: Does the higher ripple current rating of the EEU-EE2W560 affect compatibility?

A: No. The substitute part's higher ripple current capability (483 mA @ 120 Hz and 1.38 A @ 100 kHz) does not create incompatibility. It indicates the substitute can handle equal or greater ripple current demands.

Q: What should be checked before substituting these parts?

A: Verify PCB layout clearance for the larger can diameter of the EEU-EE2W560. Confirm that the shorter height does not create mechanical interference. Electrical compatibility is assured by matching capacitance, voltage, tolerance, and temperature specifications.