UPS840/TR13 Equivalent & Substitute Parts Reference

Part Overview

The UPS840/TR13 is a Schottky diode rectifier manufactured by Microchip Technology, categorized under Diodes, Rectifiers. It features a maximum reverse voltage of 40V, an average rectified current of 8A, and is supplied in a Powermite®3 surface-mount package. The product is currently listed as active, with a non-compliant RoHS status. Identifying alternative or substitute parts is necessary when different compliance requirements or supply chain needs arise, especially where RoHS compliance is a stringent requirement.

Substiute Parts

UPS840/TR13

Microchip TechnologyIn Stock: 3067UPS840/TR13 Datasheet

Current PartRFQ

UPS840E3/TR13

Microchip TechnologyIn Stock: 45431UPS840E3/TR13 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped strictly when all critical application and regulatory parameters match, including Schottky technology, voltage rating, current rating, forward voltage, reverse leakage, package type, mounting method, temperature range, speed, and compliance status. Only those parts meeting these specified criteria within the same package and performance class are considered electrical and mechanical equivalents.

Parameter Comparison

Engineering Selection Recommendations

UPS840/TR13 and UPS840E3/TR13 are functionally and electrically equivalent, with all critical parameters and mechanical features matched. The distinction is in RoHS compliance: UPS840/TR13 is RoHS non-compliant, while UPS840E3/TR13 is ROHS3 compliant. Choose UPS840E3/TR13 when RoHS compliance is required for regulatory or market reasons. Both parts have the same moisture sensitivity level (MSL 1), REACH status, and are classified under ECCN EAR99.

Frequently Asked Questions (FAQ)

Q1: What are the essential criteria for substituting UPS840/TR13 with UPS840E3/TR13?
A1: All key electrical parameters, performance characteristics, package type, mounting method, and environmental ratings are identical. The only difference is RoHS compliance status.

Q2: Are the UPS840/TR13 and UPS840E3/TR13 compatible in terms of footprint and mechanical mounting?
A2: Yes. Both parts use the same Powermite®3 surface-mount package and Supplier Device Package (Powermite 3).

Q3: Does selecting UPS840E3/TR13 alter any electrical or thermal performance in the application?
A3: No, based on the provided parameters, electrical and thermal performance remain unchanged.

Q4: When is it necessary to select UPS840E3/TR13 over UPS840/TR13?
A4: Use UPS840E3/TR13 when RoHS compliance or specific regulatory requirements are mandatory within the system design or for global market access.

Q5: Is there any difference in moisture sensitivity or handling requirements?
A5: No. Both are rated Moisture Sensitivity Level 1 (Unlimited), requiring no special handling beyond standard surface-mount procedures.