Nichicon UPS2VR47MPD1TD Equivalent & Substitute Parts

Part Overview

The Nichicon UPS2VR47MPD1TD is a 0.47 µF, 350 V aluminum electrolytic capacitor in radial configuration with a rated lifetime of 2000 hours at 105°C. This component is classified as "Not For New Designs," indicating it has been superseded in Nichicon's product portfolio. For applications requiring continued support or component replacement in existing designs, equivalent substitute parts with improved specifications are available within the same manufacturer's catalog.

Substiute Parts

UPS2VR47MPD1TD

NichiconIn Stock: 1465UPS2VR47MPD1TD Datasheet

Current PartRFQ

UPW2VR47MPD1TD

NichiconIn Stock: 1632UPW2VR47MPD1TD Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the UPS2VR47MPD1TD is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 0.47 µF (exact match required)
• Voltage Rating: 350 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Package Configuration: Radial, Can (exact match required)
• Mounting Type: Through Hole (exact match required)
• Physical Dimensions: Lead spacing 0.138" (4.60 mm), case diameter 0.315" (8.00 mm), height 0.512" (13.00 mm) (exact match required)

The substitute part UPW2VR47MPD1TD meets all these criteria while offering an extended lifetime specification of 3000 hours at 105°C, providing improved reliability for the same electrical and mechanical interface.

Parameter Comparison

Engineering Selection Recommendations

The UPW2VR47MPD1TD is a direct substitute for the UPS2VR47MPD1TD. Both components maintain identical electrical specifications, physical dimensions, and mounting characteristics. The primary distinction is the extended operational lifetime of the UPW series (3000 hours at 105°C versus 2000 hours), which provides enhanced reliability margins without requiring any circuit modifications or PCB redesign.

Both parts carry ROHS3 compliance and REACH Unaffected status, meeting current environmental and regulatory requirements. Selection between these parts should be based on application longevity requirements and component availability, as the UPS series is designated "Not For New Designs."

Frequently Asked Questions (FAQ)

Q: Can the UPW2VR47MPD1TD be used as a direct replacement for the UPS2VR47MPD1TD?

A: Yes. The UPW2VR47MPD1TD is a direct substitute. All electrical parameters (capacitance, voltage rating, tolerance, ripple current), physical dimensions (lead spacing, case diameter, height), and mounting characteristics are identical. The UPW series offers extended lifetime at no cost to form factor or electrical performance.

Q: What is the primary difference between these two parts?

A: The UPW2VR47MPD1TD provides 3000 hours of rated lifetime at 105°C, compared to 2000 hours for the UPS2VR47MPD1TD. All other specifications remain equivalent.

Q: Are there any PCB layout or circuit design changes required when substituting the UPW2VR47MPD1TD?

A: No. Both parts share identical lead spacing (0.138" / 4.60 mm), case diameter (0.315" / 8.00 mm), and height (0.512" / 13.00 mm). No PCB modifications are necessary.

Q: Do both parts meet current compliance standards?

A: Yes. Both the UPS2VR47MPD1TD and UPW2VR47MPD1TD are ROHS3 compliant and REACH Unaffected, meeting current environmental regulations.

Q: Why is the UPS series marked "Not For New Designs"?

A: The UPS designation indicates this series has been superseded in Nichicon's product portfolio. The UPW series represents the current recommended solution for new applications requiring this capacitance and voltage rating.